Start with the assessment you are preparing for
The ADC assessment pathway commonly includes a computer-based Written Examination, typically using single-best-answer questions, and a Practical Examination assessing clinical competence through simulated, bench and/or structured clinical tasks. The written assessment tests applied dental knowledge and clinical reasoning across disciplines. Practical tasks may involve diagnosis and treatment planning, procedural skills and professionalism. Both place importance on safe, evidence-informed decisions appropriate to Australian practice.
Treat that as a broad planning framework, not a complete or permanent specification. Before you set dates or prioritise topics, check the Australian Dental Council’s official website and current candidate information for the requirements, format and guidance that apply to your sitting. Do not base your plan on remembered details from another candidate or an older guide.
The method below is an eight-week cycle you can start this week. It assumes about seven hours of focused study a week, split across four sessions. If you have less time, keep the sequence and shorten sessions; if you have more, add supervised practical practice and review rather than simply reading for longer. The cycle is a preparation structure, not a prediction of how long you need to be ready.
Set up your material and review loop
Collect the notes you will actually revise: course notes, reference material, slides and your own case or skills notes. Put them into topic boards rather than one large dentistry board. Useful divisions include diagnosis and treatment planning, restorative care, endodontics, periodontics, prosthodontics, oral surgery, paediatric dentistry, oral medicine, radiography, medical considerations and infection prevention.
A board should preserve useful details from your sources and make weak areas visible. Avoid copying whole chapters. For each topic, capture key decision points, contraindications, investigations and follow-up. When you review a case, practise explaining why an option is suitable and what would change your decision. A sample board in MySummaries might organise a caries case like this:
- Pain history — record stimulus, duration, spontaneous pain and night waking
- Examination — assess cavitation, restorability, tenderness and periodontal findings
- Prioritise pain, infection, restorability and patient factors
- Discuss reasonable options, risks, benefits and the patient's preferences
- Plan prevention and review as well as definitive treatment
- Compare sensibility responses with control teeth; a test result alone is not a diagnosis
- Record percussion, palpation and relevant symptoms
- Combine clinical findings before assigning a pulpal or apical diagnosis
Check medical history, allergies and relevant medicines; obtain informed consent, explain uncertainty and document the agreed plan.
Request imaging only when justified by the history and examination. Select an appropriate view, assess image quality, and interpret the tooth and surrounding structures in context.
Use a repeating loop: learn from your own notes, retrieve the material without looking, apply it to a case or task, then record what you missed. Spaced flashcard review can help retain discrete facts, but it cannot substitute for explaining a diagnosis, justifying an investigation or practising a procedure.
An eight-week plan you can start now
Keep four sessions each week. The suggested hours are focused time; include short breaks separately. In each session, write down an observable output, such as a completed case plan, a set of corrected questions or a procedure practised with feedback. That makes it easier to spot when “studying” has become rereading.
Week 1: Baseline and organisation — 6 hours
Session 1, 90 minutes: Read the current ADC candidate information. Note the assessment components and any official guidance that changes how you need to prepare. List your strongest and weakest dental disciplines.
Session 2, 90 minutes: Do a short mixed set of applied questions under timed conditions. Treat this as a baseline, not a prediction. For every error, label the cause: knowledge gap, missed clue, unsafe priority, weak justification or rushed reading.
Session 3, 90 minutes: Build three initial boards from your own material—for example, radiographic interpretation, infection prevention and treatment planning. Add only the points you need to retrieve or apply.
Session 4, 90 minutes: Practise one case explanation and one practical sequence aloud. Use a consistent structure: key findings, likely diagnosis and alternatives, investigations with justification, prioritised management, safety, consent and follow-up. Arrange supervised practice where a task requires hands-on feedback.
Week 2: Diagnosis and investigations — 7 hours
Session 1, 2 hours: Revise history-taking, examination and differential diagnosis across common presentations in your material. Practise concise problem representations: what matters, what is uncertain and what is urgent.
Session 2, 90 minutes: Work through radiographic cases. For each, state why the image is indicated, whether it is adequate, what you see and how the finding affects management. Do not practise naming findings without explaining their clinical relevance.
Session 3, 90 minutes: Answer applied questions on diagnosis and investigations. After each answer, explain why the strongest alternative is less appropriate for the case.
Session 4, 2 hours: Complete two structured case plans. Include relevant medical considerations, patient preferences, prevention and follow-up, not just the definitive procedure.
Week 3: Safe management and treatment planning — 7 hours
Session 1, 2 hours: Revise management choices from your own notes across restorative, endodontic, periodontal and oral surgery topics. Build a comparison table where cases have more than one reasonable option.
Session 2, 90 minutes: Practise prioritisation. For each case, identify immediate concerns first, then describe definitive care and maintenance. State what information you still need before proceeding.
Session 3, 90 minutes: Review infection prevention, aseptic technique and risk management. Practise describing preparation, protective measures, instrument handling and what you would do if a safety problem arose.
Session 4, 2 hours: Complete a timed written case response and mark it against your notes. Look for unsupported decisions, omitted risks and missing patient communication.
Week 4: Practical procedures and quality control — 7 hours
Session 1, 2 hours: Choose a procedure relevant to your practical preparation. Review the sequence, instruments and materials from reliable teaching material, including the limits and quality checks that apply to that task.
Session 2, 2 hours: Practise hands-on under appropriate supervision if available. Ask for feedback on sequence, handling, accuracy and the final result. A written description or video cannot tell you whether your hand skills are adequate.
Session 3, 90 minutes: Rehearse a verbal walk-through: preparation and infection control, procedural steps, critical checks, common errors, post-operative advice and documentation.
Session 4, 90 minutes: Review the errors from practice and make a short corrective checklist. Repeat the weak part rather than restarting the entire task without purpose.
Week 5: Integrate disciplines and patient factors — 7 hours
Session 1, 2 hours: Work through mixed cases that combine dental findings with medical history, medication, risk, patient priorities or uncertainty. Practise stating assumptions instead of silently filling gaps.
Session 2, 90 minutes: Revise communication: explain options in plain language, check understanding, address consent and record the decision. Practise adapting the explanation to the patient in the case.
Session 3, 90 minutes: Complete mixed single-best-answer practice. Keep an error log and turn repeated errors into a small set of review prompts.
Session 4, 2 hours: Do one case-based oral rehearsal with a peer or recording. Answer in headings, prioritise safety and finish with a clear plan and follow-up.
Week 6: Timed practice and targeted repair — 7 hours
Session 1, 2 hours: Complete a timed mixed question set using the timing guidance in your current official materials where applicable. Review every uncertain answer, not only incorrect ones.
Session 2, 90 minutes: Sort errors by topic and cause. Choose the two areas that cost you the most marks or create the greatest safety risk. Review those sources and update the relevant boards.
Session 3, 2 hours: Practise two practical or structured clinical tasks. Use a timer if that matches the task you are rehearsing, but do not trade safe sequencing for speed.
Session 4, 90 minutes: Retrieve key facts and decisions from memory. Review due cards and correct errors against your source notes.
The review queue can stop old topics disappearing while you focus on the current week. A due view in MySummaries could look like this:
Week 7: Repair the weakest topics — 7 hours
Session 1, 90 minutes: Review your error log and choose one weak topic. Revisit the source, then explain the key decisions without looking.
Session 2, 2 hours: Complete a timed case or question set focused on that topic. Identify whether errors remain factual, interpretive or related to prioritisation.
Session 3, 2 hours: Practise a practical task or structured clinical station with feedback. Repeat one specific weakness and record what changed.
Session 4, 90 minutes: Do mixed recall across previously studied topics. Keep the last part of the session for due reviews rather than adding another broad topic.
When selecting what to revisit, use performance evidence rather than choosing the topic you enjoy most. A topic picker in MySummaries might flag radiographic interpretation as the next focus:
Radiographic interpretation · Struggling — several recent image questions were missed because findings were not linked to management
Week 8: Consolidate and check readiness — 6 hours
Session 1, 2 hours: Complete one representative timed practice session for the written component using the official guidance available to you. Review it thoroughly afterwards; the score alone does not tell you what to fix.
Session 2, 2 hours: Rehearse practical sequences and case explanations. Focus on safe preparation, correct prioritisation, clear reasoning and patient-centred communication.
Session 3, 1 hour: Review due cards, key checklists and your error log. Do not try to memorise large new sections at the expense of sleep or a careful review.
Session 4, 1 hour: Check logistics against official ADC information, then make a short final revision list based on actual remaining gaps. If you are not ready, use the evidence to extend the cycle rather than treating the calendar as proof of readiness.
Use errors to choose the next week’s work
At the end of each week, record the topics attempted, the errors repeated and the practical feedback received. Rank weaknesses by both frequency and consequence: a repeated error in patient safety or investigation justification deserves attention even if it appears in fewer practice questions. One practice dashboard in MySummaries could summarise the pattern like this:
Use the percentages as feedback on your practice, not as an official ADC score or a prediction of an outcome. For each weak area, set one measurable task for the next week: interpret a set of cases, explain a management choice, repeat a procedural step with feedback or correct a specific knowledge gap.
How MySummaries helps
MySummaries lets you build dentistry revision boards from your own notes, then turn sections into spaced-repetition flashcards and written or recorded oral practice. Use those tools to organise the review loop in this plan; arrange hands-on procedural practice and verify exam requirements through the relevant official ADC information.