Build your plan around the exam you are taking
The CIMA Professional Qualification is assessed through Objective Tests (OTs) and integrated Case Study exams at each level. OTs use computer-based, time-limited questions across the syllabus. Case Study exams ask you to respond to a pre-seen business scenario and unseen tasks on the day. Both require technical knowledge; Case Study answers also need relevant analysis, professional judgement and clear business communication.
Before setting your weekly hours, confirm your current syllabus, exam requirements and booking details on the official CIMA website. Then name the specific exam you are preparing for and choose a realistic exam date. If you are sitting an OT and a Case Study in the same period, give each a separate block of study time rather than treating them as interchangeable.
This plan uses a six-week cycle you can start this week. It assumes around seven hours of study each week, split into sessions of 60–90 minutes. If you have fewer hours, keep the session order and extend the plan; if you have more, add practice and review rather than filling the time with rereading.
Set up a short daily review
Begin each study day with 15 minutes of retrieval practice: answer due flashcards before opening your notes. This gives you a quick way to revisit definitions, formulas and technical distinctions. Do not count this as a substitute for a full study session.
A due queue should show what needs attention across your current boards. The numbers below represent a sample candidate’s review queue, not an exam requirement. In MySummaries, the queue is generated from the flashcards built from your own study material.
A practical rule: if the daily queue regularly takes longer than 15–20 minutes, reduce the number of new cards you add. Keep cards to one fact or decision at a time, and make sure each answer is specific enough to check.
Week 1: Diagnose and organise — 7 hours
Session 1, 90 minutes: Check the official syllabus and your own notes for the exam you are taking. Divide the material into topic boards. Mark each topic as familiar, uncertain or not yet studied; this is a planning judgement, not a prediction of the exam.
Session 2, 90 minutes: Attempt a short set of OT-style questions if you are preparing for an OT. For a Case Study, analyse a practice scenario: identify the requirement verbs, relevant facts and decisions. Record the errors you make, including misreading a requirement or failing to use a case fact.
Session 3, 90 minutes: Build your first board from your own notes. Include key rules, formulas, assumptions and a worked example. For Case Study preparation, create a board for a decision you might need to analyse, such as a working-capital problem.
Session 4, 90 minutes: Practise applying the material. For OTs, answer questions and explain why the strongest alternative is wrong. For Case Studies, write a brief response to a scenario task, using a clear recommendation and relevant figures.
Session 5, 90 minutes: Review mistakes and create flashcards only for facts you need to recall quickly. Finish by choosing the three topics that need the most attention in Week 2.
A board turns scattered notes into a working reference. This example uses simple scenario figures to connect a calculation with a business decision; the figures are not CIMA exam data. In MySummaries, a board is built from your own material and can combine its key points, tables and card reminders.
| Measure | Current | Proposed target |
|---|---|---|
| Receivables days | 52 | 40 |
| Inventory days | 68 | 55 |
| Payables days | 44 | 50 |
Prioritise a phased receivables review; monitor overdue balances, disputes and customer retention. Test inventory reductions against service levels before changing reorder settings.
Annual credit sales are £3.65m. At 52 days, receivables are approximately £520,000; at 40 days, approximately £400,000. The potential cash release is about £120,000, assuming sales and collection patterns stay comparable.
- Receivables — tighter credit control may improve cash flow but could affect customer retention.
- Inventory — lower stock may release cash but increases the risk of shortages.
- Payables — longer terms support cash flow only if suppliers accept them without damaging supply or terms.
Week 2: Strengthen technical foundations — 7 hours
Session 1, 75 minutes: Review one topic from the official syllabus and make a one-page summary from your notes. For each rule or formula, add a plain-language explanation of when it applies.
Session 2, 90 minutes: Work through calculations without looking at the solution. Check units, signs, time periods and assumptions. Write down the interpretation as well as the result: a number without its business meaning is often incomplete.
Session 3, 75 minutes: Complete a timed OT practice set, or a timed Case Study analysis exercise. Use the exam provider’s official materials where available; check the official CIMA website for current exam guidance rather than relying on an old question’s format.
Session 4, 90 minutes: Correct your work. Sort each lost mark into a cause: knowledge gap, calculation, misread requirement, weak application or unclear communication. Fix the cause, not just the answer.
Session 5, 90 minutes: Revisit the weakest topic and attempt fresh questions. End with 30 minutes of spaced-repetition cards.
If your results show one area repeatedly costing marks, direct the next session there. A topic picker can use your own practice history to suggest what to revisit; “hot” and “warm” here describe study priority, not the importance of a topic in CIMA’s exam.
Requirement verbs and response structure · Struggling — 5 of 12 practice responses missed a requirement or did not state a decision
Week 3: Practise under constraints — 7 hours
Session 1, 90 minutes: Complete a timed set of OT questions or a timed Case Study task. Use a timer suited to the practice material you have chosen; do not assume that one practice set establishes the official timing of your exam.
Session 2, 90 minutes: Review every response, including correct guesses. For an OT, name the concept, apply the rule, compare the options and justify your selection. For a Case Study, identify the command verb and respond to it directly.
Session 3, 75 minutes: Practise using scenario data. Select the figures that matter, calculate accurately and explain what they imply. If a task asks you to evaluate, compare options and state trade-offs rather than presenting one-sided benefits.
Session 4, 75 minutes: Rewrite one weak Case Study answer under clear headings. A useful structure is requirement and context, analysis with calculations, options appraisal, recommendation, risks or controls, and next steps. Choose only headings that fit the task.
Session 5, 90 minutes: Review cards and repair one weak board. Add a worked example where your notes contain a formula but not its application.
Week 4: Turn errors into a revision sequence — 7 hours
Session 1, 60 minutes: Review due cards, then scan your error log. Select two recurring problems, not every topic that feels difficult.
Session 2, 90 minutes: Target the first problem with focused practice. If you confuse concepts, make a comparison table. If you make calculation errors, show each step and check the result against the scenario.
Session 3, 90 minutes: Target the second problem in a different question or scenario. A new context helps you check whether you can apply the idea rather than recall one worked answer.
Session 4, 90 minutes: Complete a timed mixed practice session. Alternate between technical recall and application so you practise choosing the relevant knowledge.
Session 5, 90 minutes: Mark and categorise the work. A useful tracker separates the percentage earned from the number of practice attempts; a weak result after repeated practice deserves priority. In MySummaries, the weak-area view can use your own results to organise this review.
The percentages and attempt counts in this example are a practice record, not CIMA pass marks or an estimate of how often a topic appears in an exam. Recheck the same skill after targeted practice; a single improved score is useful evidence, but not proof that the skill is secure.
Week 5: Practise complete responses — 7 hours
Session 1, 90 minutes: Complete a longer timed practice set or a full practice response using the materials available for your exam. For an OT, review both the answer and the reasoning behind it. For a Case Study, work from the scenario and address each requirement separately.
Session 2, 90 minutes: Mark the work against the question’s requirements. Check whether you answered the command verb, applied the scenario, used numbers appropriately and made a decision where one was needed.
Session 3, 75 minutes: Select the two largest gaps and revise only the relevant notes. Avoid rewriting whole chapters. Use flashcards for recall and short written explanations for application.
Session 4, 90 minutes: Do a fresh set of questions or a new scenario task. Keep a record of the time used, the marks or points gained and the main error type.
Session 5, 75 minutes: Practise concise professional communication. Remove repeated points, label calculations, state assumptions and make recommendations explicit. For Case Study answers, order points by business impact rather than by the order in which you remembered them.
Week 6: Consolidate and decide what comes next — 7 hours
Session 1, 90 minutes: Complete one final timed practice session under conditions that are practical for you. Use current official guidance to confirm the requirements for your booked exam; do not infer them from a study plan.
Session 2, 90 minutes: Review errors carefully. Rework incorrect calculations and rewrite incomplete answers. For each correction, explain why the revised answer earns credit in relation to the requirement and scenario.
Session 3, 75 minutes: Review your Must not miss core: the small set of rules, formulas and decision points you need to retrieve accurately. Do not treat this checklist as a substitute for syllabus coverage.
Session 4, 60 minutes: Review due cards and stop adding new material unless you have identified a specific gap. If the exam is not yet booked or is further away, repeat the cycle with fresh practice rather than restarting from scratch.
How to adapt the plan
If you are preparing for an OT, reserve at least two weekly sessions for answering questions and analysing distractors. Build speed through regular timed practice, but check the current official exam details before setting an exact timing target.
If you are preparing for a Case Study, use at least two sessions each week to apply technical knowledge to a business scenario. Practise identifying the requirement verb, selecting relevant case facts, supporting analysis with numbers and making a justified recommendation. A technically correct point that is not connected to the scenario may not answer the task well.
If you are taking both types of assessment, keep separate practice records and boards. Adjust the balance according to your current exam and the gaps your practice reveals. Use the six-week sequence as a repeatable cycle, not a promise of readiness: readiness depends on your syllabus coverage, practice performance and the official requirements for your sitting.
How MySummaries helps
MySummaries turns your PDFs, slides and photographed notes into revision boards, then generates spaced-repetition cards and written mock exams marked against your material. For this plan, use the boards to organise each CIMA topic, the due queue to schedule recall, and your practice results to choose the next weak area to work on.