Physical chemistry becomes easier to study when you treat each problem as a chain of decisions: identify the system, choose a model, apply the right relationship, and check whether the result makes physical sense. Memorising equations helps, but it is not enough if you cannot tell when an equation applies or what its answer means.

The subject varies between courses. Use your syllabus, lecture notes and assessment guidance to identify the topics and conventions you are expected to know; do not assume that every course covers the same material. The method below works across common areas such as thermodynamics, equilibrium, kinetics, electrochemistry and molecular energy levels.

Start with a map of your course

Make a revision board from your own material, rather than copying a generic topic list. Use your syllabus to set the boundaries, then add the equations, assumptions, worked examples and definitions from your notes. If a result depends on a particular convention—such as the sign convention for work—record the convention used in your course beside it.

Organise the board by ideas that help you solve problems. For example, put equilibrium constants near Gibbs energy, and rate laws near integrated rate equations and half-lives. This makes connections visible without merging concepts that need different assumptions. Mark sections where you routinely get stuck or have questions to revisit.

A board in MySummaries on this topic might look like this:

Physical Chemistry Thermodynamics, equilibrium and ratesStudy
Core relationships and problem methodsThermodynamics, equilibrium and rates5 sections · 3 columns
Thermodynamic state functions
  • Gibbs energy: ΔG = ΔH − TΔS at constant temperature and pressure
  • For a spontaneous change at constant T and p, ΔG < 0
  • Use temperature in kelvin; keep energy units consistent
Electrochemistry

For a cell reaction written as reduction at the cathode and oxidation at the anode: Ecell = Ecathode − Eanode, using reduction potentials. At 298 K, E = E° − (0.05916 V/n) log₁₀ Q.

Equilibrium
  • Standard Gibbs energy: ΔG° = −RT ln K
  • At equilibrium, Q = K and ΔG = 0
  • Write the balanced reaction before constructing K
Molecular energy levels4 due
  • Photon energy: ΔE = hν = hc/λ
  • Absorption occurs when photon energy matches an allowed energy gap
  • Shorter wavelength means higher photon energy
First-order kinetics
QuantityRelationship
Integrated rate lawln([A]t/[A]₀) = −kt
Half-lifet₁/₂ = ln 2/k
Units of ktime⁻¹

Use the board to locate knowledge, not as a substitute for solving problems. For each section, add at least one example from your course and annotate the step where a choice was made: for instance, why a constant-volume condition calls for a different energy relationship from a constant-pressure one.

Use the same setup routine for every calculation

Before using a calculator, write down four things:

  1. What is being asked? State the unknown, including its units if applicable.
  2. What is given? Record values, units, temperature, pressure and any stated conditions.
  3. What model applies? Name the law or equation and its assumptions.
  4. What should the answer look like? Predict the sign, scale or trend where possible.

Then rearrange the equation symbolically, substitute values with units, and calculate. This makes it easier to find the source of an error. Keep extra digits during working and round at the end in line with the data and your course’s guidance.

A short error log is more useful than simply marking a problem wrong. For each error, write the cause and the correction: “used Celsius in RT; convert to kelvin first” or “included a pure solid in K; omit pure solids and liquids.” Rework the same type of problem later without looking at the correction. If you repeat an error, make it a priority for your next session.

Build a compact core checklist

A core checklist should contain the facts and decisions that many problems depend on. It is not a formula sheet copied without context. Include conditions, signs, units and the most common point at which you need to choose between methods. Check every entry against your own course materials, particularly where notation or conventions differ.

A MySummaries core checklist for this board could be:

Key pointsThermodynamics, equilibrium and rates
At constant T and p, ΔG = ΔH − TΔS; a spontaneous change has ΔG < 0 under these conditions.
For a reaction as written, ΔG° = −RT ln K; use R = 8.314 J mol⁻¹ K⁻¹ when energy is in joules.
For first-order disappearance, ln([A]t/[A]₀) = −kt and t₁/₂ = 0.693/k; k has units of inverse time.
At 298 K, E = E° − (0.05916 V/n) log₁₀ Q; define the reaction quotient for the balanced cell reaction.
Photon energy is ΔE = hν = hc/λ; check that the calculated transition matches the direction of absorption or emission.

Test each item by explaining when it is useful and when it is not. For example, the relation ΔG° = −RT ln K refers to standard Gibbs energy and the equilibrium constant for the reaction as written; it does not say that the actual ΔG is always zero. At non-equilibrium conditions, use ΔG = ΔG° + RT ln Q.

Practise retrieval with one-fact cards

Flashcards work best for short, checkable facts: an equation with its conditions, a definition, a unit, or a consequence of changing one variable. They are less suitable for storing an entire derivation. For a derivation, use a card to prompt the first step or the key assumption, then practise writing the reasoning on paper.

Work through a card by answering before turning it over. Grade it honestly: use the lowest rating that reflects how readily you produced the answer, not whether it looks familiar once revealed. Revisit difficult cards at spaced intervals, and add a card when your error log shows that you cannot recall a useful fact without prompting. The equations below are a compact drill to work through now.

A MySummaries flashcard drill from this board might contain:

Cards — Thermodynamics, equilibrium and rates8 due

At constant temperature and pressure, what expression relates Gibbs energy, enthalpy and entropy?

ΔG = ΔH − TΔS; use T in kelvin and consistent energy units.

All 8 cards
At constant temperature and pressure, what expression relates Gibbs energy, enthalpy and entropy?ΔG = ΔH − TΔS; use T in kelvin and consistent energy units.
What is the relationship between standard Gibbs energy and the equilibrium constant?ΔG° = −RT ln K for the reaction as written.
What condition relates the reaction quotient to the equilibrium constant at equilibrium?Q = K; the reaction mixture has no net tendency to change composition.
Write the integrated rate law for first-order disappearance of A.ln([A]t/[A]₀) = −kt.
What is the half-life for a first-order reaction?t₁/₂ = ln 2/k, approximately 0.693/k.
What are the units of the first-order rate constant k?Inverse time, such as s⁻¹ when time is measured in seconds.
What is the Nernst equation at 298 K using base-10 logarithms?E = E° − (0.05916 V/n) log₁₀ Q, where n is the number of electrons transferred.
How are photon energy, frequency and wavelength related?ΔE = hν = hc/λ; energy increases with frequency and decreases with wavelength.

That is a MySummaries deck, filled with physical chemistry material. Yours is written from your own notes. Start free

After each card, say one extra sentence about its use. For example, the Nernst equation requires a reaction quotient built from the balanced cell reaction, and n must match the electrons transferred in that reaction. This brief application step helps separate recall of a formula from understanding how to use it.

Study each topic with its own problem routine

Thermodynamics

For a thermodynamics question, identify the system and the stated conditions first. Then decide which state functions or energy changes are required. Keep track of signs and convert temperature to kelvin before using expressions that contain T. If you calculate ΔG, interpret the sign under the conditions stated in the problem; do not turn a sign result into a claim about reaction speed.

Equilibrium

Start with the balanced equation, then write the reaction quotient or equilibrium expression using the correct stoichiometric powers. For concentration or pressure changes, make a before-change-equilibrium table if that structure helps you keep track of amounts. Check whether the final values are physically possible and whether they satisfy the equilibrium relationship. Remember that K is tied to the reaction as written: reversing or rescaling the equation changes its value.

Kinetics

Distinguish a differential rate law from an integrated rate equation. Use the information in the question to identify the order rather than selecting a convenient equation by habit. Check the units of k and whether the data support the assumed order. For a first-order process, a plot of ln[A] against time is linear with slope −k; the half-life does not depend on the starting concentration.

Electrochemistry and molecular energy levels

For electrochemistry, write the cell reaction and reaction quotient before substituting into the Nernst equation. Confirm the number of electrons transferred and keep the electrode-potential convention consistent. For spectra, connect the observed wavelength or frequency to photon energy, then compare that energy with the relevant transition. Practise explaining the direction of a trend as well as calculating a number.

Use audio to rehearse a chain of reasoning

An audio explanation can help when you need to hear how a calculation is set up, but it should not replace active practice. Listen to a short section, pause before a decision point, and say what you would do next. Then compare your reasoning with your notes or a worked example. If the explanation contains a result you cannot reproduce, return to the board and solve a related question yourself.

A MySummaries lecture on this board could follow the connection between equilibrium and Gibbs energy:

Lecture — Thermodynamics, equilibrium and rates8 min
From Gibbs energy to equilibriumConnects the standard Gibbs energy change to K, Q and the direction of change.
03:1608:02
Speed1×1.25×1.5×2×

Transcript · tap any word to jump there

Start by separating ΔG° from ΔG. The standard change belongs to the chosen reaction under standard conditions, while ΔG describes the reaction mixture at its current composition. The relationship between them is ΔG = ΔG° + RT ln Q. Before using it, write the balanced reaction and construct Q with the correct powers.

At equilibrium, the composition has Q = K and ΔG = 0. Substituting those conditions gives ΔG° = −RT ln K. This means a negative ΔG° corresponds to K greater than one for the reaction as written, while a positive ΔG° corresponds to K less than one. It does not tell you how quickly equilibrium is reached.

For a calculation, check whether the question gives K or ΔG°, convert temperature to kelvin, and keep energy units consistent with R. If the system is not at equilibrium, compare Q with K or calculate ΔG using the actual Q. Finish by stating what the sign or comparison means for the direction of change under the conditions given.

Turn revision into a repeatable cycle

For each study session, choose one board section and one problem type. Spend a short opening period recalling key relationships without notes, then solve a small set of representative problems. Mark them against your course materials, classify each error, and finish by updating the board or making cards for the specific facts you missed. In a later session, revisit the error without looking at your previous solution.

Use your course’s syllabus and assessment guidance to decide how much time to give each topic and what kinds of practice to prioritise. If you are unsure whether a convention, derivation or topic is examinable, check the official course or assessment source rather than guessing. The aim is to arrive at each problem with a reliable setup routine and enough understanding to explain why your method fits.

How MySummaries helps

MySummaries lets you build a revision board from your own physical chemistry notes, then generate spaced-repetition flashcards and examiner-voiced audio lectures from that material. Use the board to organise equations and assumptions, the cards to retrieve high-value facts, and the audio to rehearse a line of reasoning before solving problems independently.