A working pharmacokinetics flashcard deck

Pharmacokinetics questions often test whether you can choose and use the right relationship, not just recall a definition. A useful deck therefore links each term to its equation, units and practical consequence. These pharmacokinetics flashcards cover the core relationships that recur across pharmacy study: volume of distribution, clearance, half-life, bioavailability, dosing and steady state.

Work through the deck as a retrieval drill. For each prompt, try to state the fact before looking at the answer. Grade the attempt by how well you recalled it, not by whether the answer looks familiar once revealed. If you cannot state the equation or mix up its variables, mark it Again. If you got it right but needed a long pause, choose Hard. Use Good for a correct answer recalled without substantial effort, and Easy only when it came immediately and accurately. The review system can then bring difficult facts back sooner than secure ones.

A pharmacokinetics deck in MySummaries looks like this:

Cards — Pharmacokinetics — core equations18 due

What does apparent volume of distribution (Vd) equal?

Amount of drug in the body ÷ plasma drug concentration. Units are usually L or L/kg.

All 18 cards
What does apparent volume of distribution (Vd) equal?Amount of drug in the body ÷ plasma drug concentration. Units are usually L or L/kg.
What does clearance (CL) equal?Rate of drug elimination ÷ plasma concentration. It is a volume of plasma cleared of drug per unit time, commonly L/h.
For first-order elimination, what is the half-life equation?t½ = 0.693 × Vd ÷ CL.
What is the loading dose equation for a target plasma concentration?Loading dose = target concentration × Vd ÷ F, where F is bioavailability.
What is the maintenance dosing rate for a target average steady-state concentration?Dosing rate = target Css × CL ÷ F.
For repeated doses given every τ hours, what maintenance dose targets an average Css?Dose per interval = target Css × CL × τ ÷ F.
How is absolute oral bioavailability (F) calculated against an IV reference?F = (AUC oral ÷ AUC IV) × (IV dose ÷ oral dose). Use dose normalisation if the doses differ.
What is the absolute bioavailability of an IV dose?F = 1, or 100%, because the dose enters systemic circulation directly.
For an IV bolus in linear pharmacokinetics, how do you calculate clearance from dose and AUC?CL = IV dose ÷ AUC.
In first-order elimination, what remains constant over time?The fraction eliminated per unit time; the amount eliminated per unit time changes with concentration.
In zero-order elimination, what remains constant over time?The amount eliminated per unit time, while the fraction eliminated changes. Ethanol is a common example over relevant concentration ranges.
During a constant-rate IV infusion, what is the steady-state concentration equation?Css = infusion rate (R₀) ÷ clearance (CL).
About how many half-lives are needed to approach steady state with repeated dosing or constant infusion?About four to five half-lives, assuming linear, first-order pharmacokinetics.
If clearance halves while Vd stays the same, what happens to first-order half-life?It doubles, because t½ = 0.693 × Vd ÷ CL.
Which parameter primarily determines loading dose: Vd or clearance?Vd. For a given target concentration and F, loading dose = target concentration × Vd ÷ F.
Which parameter primarily determines maintenance dosing rate: Vd or clearance?Clearance. For a given target Css and F, dosing rate = target Css × CL ÷ F.
In a one-compartment model, what does a larger Vd imply for plasma concentration at the same amount of drug in the body?A lower plasma concentration, because Vd = amount in the body ÷ plasma concentration.
What mainly determines the extent of accumulation during repeated dosing in linear pharmacokinetics?The dosing interval relative to the elimination half-life: shorter intervals relative to t½ produce greater accumulation.

That is a MySummaries deck, filled with pharmacokinetics material. Yours is written from your own notes. Start free

Turn the cards, then make the equations usable

The first card is shown face-up: give yourself an answer before revealing the back. Continue through the rest in order, answering each prompt and grading each retrieval. Do not award Easy because the answer seems obvious after you read it; the grade should reflect what happened before the answer was visible.

After the first pass, inspect the cards marked Again or Hard. For each one, say the complete relationship, including what is in the numerator and denominator. For example, saying that half-life depends on clearance is incomplete: for first-order elimination it is proportional to Vd and inversely proportional to CL. Saying that a loading dose depends on clearance is a common error; clearance governs maintenance dosing, while the loading dose is determined by the target concentration, Vd and F.

The equations also need dimensional checks. In the loading-dose equation, concentration multiplied by volume gives an amount of drug; dividing by a dimensionless F adjusts for incomplete systemic availability. In the maintenance-rate equation, concentration multiplied by clearance gives amount per time. If a question asks for a maintenance dose at an interval, multiply the rate by the interval. Keep units consistent before substituting numbers.

Must not miss core

Once the cards are familiar, use this short checklist to test whether the main relationships are connected. It is not a replacement for the deck: it is a compact way to spot a missing link before a calculation or explanation.

The core checklist behind the deck looks like this:

Key pointsPharmacokinetics — core equations
Vd = amount in body ÷ plasma concentration; CL = elimination rate ÷ plasma concentration.
For first-order elimination, t½ = 0.693 × Vd ÷ CL; lower CL lengthens half-life if Vd is unchanged.
Loading dose = target concentration × Vd ÷ F; maintenance rate = target Css × CL ÷ F.
For repeated dosing, dose per interval = target Css × CL × τ ÷ F; IV bioavailability is 1.
At constant infusion, Css = R₀ ÷ CL; with linear first-order kinetics, approach to steady state takes about four to five half-lives.

A practical review routine

Use this routine for a short study session rather than trying to memorise every equation at once:

  1. Retrieve: answer all due cards without reading the backs first. Say units aloud where the question involves a parameter or calculation.
  2. Grade honestly: use Again when the fact was unavailable, Hard for slow or effortful recall, Good for a correct answer recalled reliably, and Easy for immediate recall. If you guessed correctly, do not treat the guess as secure knowledge.
  3. Repair one error: write or say the correct relationship and explain why the incorrect version fails. For example, loading dose is linked to Vd, not CL; a patient can have a large Vd without having a high clearance.
  4. Apply it: make a simple calculation from the equation. Keep the target concentration, Vd, clearance, F and dosing interval in consistent units. Check whether the answer should be an amount, a rate or a concentration.
  5. Review again when due: repeated retrieval over time is more useful than rereading a formula several times in one sitting. Do not force an interval schedule from memory; follow the review dates your study system sets.

When calculations are part of your course, add numerical cards based on worked examples from your own notes. Include the units in the prompt and answer, and state any assumptions, such as linear pharmacokinetics or an IV dose. Do not turn a multi-step calculation into one oversized card: split it into identifying the equation, substituting values, and checking the units. That makes it easier to identify whether the problem is equation selection or arithmetic.

Common mistakes to check

First, distinguish Vd from a physical anatomical volume. It is an apparent parameter calculated from the amount in the body and plasma concentration; it can be larger than total body water. Second, do not confuse the amount eliminated with the fraction eliminated. First-order elimination removes a constant fraction per unit time, whereas zero-order elimination removes a constant amount per unit time. Third, remember that the four-to-five-half-life rule assumes first-order, linear behaviour; it is not a universal rule for every drug or kinetic situation.

Finally, bioavailability adjusts oral or other non-IV dosing. It does not mean that the administered dose is automatically the amount reaching systemic circulation. When comparing AUC values from different doses, normalise for dose as shown on the card. For drug-specific dosing, therapeutic targets or non-linear kinetics, use the material and guidance relevant to your course and the particular medicine rather than applying a core equation without checking its assumptions.

How MySummaries helps

MySummaries turns your own pharmacokinetics notes into a revision board and generates flashcards from them, so you can practise the equations and definitions against the material you are studying. Review due cards, mark uncertain answers for further work, and return to the relevant board section when a relationship needs repair. Open MySummaries.