How to use this deck

This deck covers a connected set of classical mechanics fundamentals: kinematics, forces, energy, momentum, circular motion, gravitation, rotation and simple harmonic motion. It is designed for active recall, not for reading through once. Work through the cards in order, then return to the ones that expose a gap.

For each card, pause at the question and say or write the answer from memory before turning it. Compare your answer with the back. Grade it honestly: choose Again if you could not retrieve the fact, Hard if you needed substantial effort, Good if you recalled it correctly, or Easy if it came quickly and accurately. A correct formula with a missing condition is not an Easy response.

A MySummaries deck on this topic looks like this:

Cards — Classical Mechanics — Core relations20 due

For constant acceleration, how are final velocity v, initial velocity u, acceleration a and elapsed time t related?

v = u + at.

All 20 cards
For constant acceleration, how are final velocity v, initial velocity u, acceleration a and elapsed time t related?v = u + at.
For constant acceleration, what is displacement s after time t, given initial velocity u?s = ut + ½at².
For constant acceleration, which equation relates v, u, a and displacement s without using time?v² = u² + 2as.
State Newton’s second law for a body of constant mass in an inertial frame.The resultant force is F_net = ma; acceleration is in the direction of the resultant force.
What is the maximum magnitude of static friction before slipping begins?f_s,max = μ_s N, where μ_s is the coefficient of static friction and N is the normal reaction.
For a block on a slope at angle θ to the horizontal, what is the component of its weight parallel to the slope?mg sin θ, directed down the slope.
What is the work done by a constant force F over displacement d at angle θ to the displacement?W = Fd cos θ.
State the translational kinetic energy of a body of mass m and speed v.K = ½mv².
Near Earth’s surface, what is the change in gravitational potential energy when a mass m rises vertically by height h?ΔU = mgh, assuming g is approximately constant over the height.
State the work–energy theorem for a particle.The net work done on the particle equals its change in kinetic energy: W_net = ΔK.
Define impulse for a constant resultant force acting for a time interval Δt.J = F_net Δt = Δp, the change in momentum.
When is total linear momentum conserved for a system?When the resultant external force on the system is zero; internal forces do not change the system’s total momentum.
What is the magnitude of centripetal acceleration for speed v on a circular path of radius r?a_c = v²/r, directed towards the centre of the circle.
What resultant radial force is required to keep a mass m moving at speed v in a circle of radius r?F_radial = mv²/r, directed towards the centre; it is provided by the actual forces acting on the body.
State Newton’s law of universal gravitation for two point masses separated by distance r.F = Gm₁m₂/r², along the line joining the masses; the force is attractive.
What is the magnitude of torque from a force F applied at position vector r, with angle θ between r and F?τ = rF sin θ.
State the angular momentum of a point particle about an origin.L = r × p, where r is its position vector and p is its linear momentum.
What is the rotational kinetic energy of a rigid body rotating about a fixed axis?K_rot = ½Iω², where I is the moment of inertia about the axis and ω is angular speed.
What condition defines simple harmonic motion in one dimension?The acceleration is proportional to displacement from equilibrium and directed towards equilibrium: a = −ω²x.
What is the period of an ideal mass–spring oscillator with mass m and spring constant k?T = 2π√(m/k), for small oscillations of an ideal spring–mass system.
A 20-card classical mechanics deck with the first card face-up and the remaining questions ready to practise.

That is a MySummaries deck, filled with classical mechanics material. Yours is written from your own notes. Start free

Study the relations, not just the symbols

After the first pass, repeat the cards you graded Again or Hard. On a second pass, explain what each symbol means and state any condition attached to the relation. For instance, the constant-acceleration equations require acceleration not to change during the interval. They are not general-purpose replacements for calculus or a changing-acceleration model.

Use a free-body diagram when a force question feels uncertain. Draw the body, include only forces acting on it, choose axes that simplify the motion, and resolve each force into components. On an incline, the component of weight along the slope is mg sin θ; the perpendicular component is mg cos θ. The normal reaction is not automatically equal to mg: it depends on the other forces and the acceleration perpendicular to the surface.

The friction card is a threshold relation for static friction, not a statement that static friction always equals μ_sN. Static friction takes the value required to prevent slipping, up to its maximum μ_sN. Once sliding occurs, a common idealised model uses kinetic friction with magnitude μ_kN. Keep the regimes distinct when setting up a problem.

Connect forces to energy and momentum

The work–energy theorem is useful when the question asks about speed after a displacement and the work by the forces is easier to calculate than the acceleration over time. Add the work done by each force, including negative work when a force opposes the displacement, to find W_net = ΔK. If you use gravitational potential energy instead, be consistent: account for gravity through ΔU, rather than counting its work a second time.

Impulse gives a different route through a force problem. A force acting over time changes momentum; for a variable force, impulse is the integral of force over the time interval, or equivalently the area under a force–time graph. Momentum conservation applies to a defined system when its net external impulse is zero (or negligible over the interval). In a collision, identify the system before using conservation; an external force on one object may be internal to a larger system.

A MySummaries core checklist from which this deck is cut looks like this:

Key pointsClassical Mechanics — Core relations
Constant-acceleration motion — v = u + at; s = ut + ½at²; v² = u² + 2as. Use only when acceleration is constant.
Dynamics and components — F_net = ma; on a slope at angle θ, weight components are mg sin θ parallel and mg cos θ perpendicular to the surface.
Energy and momentum — W_net = ΔK; J = Δp; total system momentum is conserved when the net external force or impulse is zero.
Circular motion and rotation — a_c = v²/r; F_radial = mv²/r; τ = rF sin θ; K_rot = ½Iω².
The four high-value checks anchoring the mechanics deck before a longer problem set.

Use the missed answer to choose your next step

A card you miss is useful only if you identify why it was missed. Was the relation unfamiliar, did you confuse a direction with a magnitude, or did you apply a correct formula outside its conditions? Write a short correction in your own words, then retest the card later rather than immediately repeating it until it feels familiar.

Pay particular attention to circular motion. “Centripetal force” is not an extra force to add to a diagram; it names the resultant inward force required for circular motion. Tension, gravity, friction or a normal force may provide that resultant, depending on the situation. Likewise, the gravitational force law uses the distance between the masses and an inverse-square dependence, while near-surface gravitational potential energy mgh assumes a nearly constant g over the height considered.

A MySummaries remediation tray can turn a repeatedly missed point into a prompt for the next review:

Remediation tray

You lost this mark twice: a car moves round a level bend at constant speed. Which real force supplies the inward resultant force, and what condition must it satisfy?

Add cardDismiss
A targeted review prompt for a recurring confusion about the source of centripetal force.

A strong answer identifies static friction between the tyres and road as the inward force in the idealised no-skid case, with sufficient magnitude to provide the required resultant mv²/r. If the available friction is too small, the car cannot follow that circular path without skidding. Naming “centripetal force” alone does not identify the physical interaction.

A repeatable review routine

Use this routine for the deck over several short sessions:

  1. First pass: attempt all cards and grade each response based on recall and accuracy. Mark a formula as uncertain if you cannot state its conditions or direction.
  2. Correction pass: revisit Again and Hard cards. Work one representative numerical example for each weak relationship, with units and a diagram where appropriate.
  3. Mixed retrieval: shuffle the topics. This prevents you from relying on the order of the deck to tell you which equation to use. Before calculating, say why the relevant principle applies.
  4. Transfer check: solve a new problem that combines ideas, such as using a free-body diagram to find a normal force, then using work–energy to find a speed. Return to a card if the setup exposes a gap.

The aim is not to memorise equations without context. It is to retrieve the right relation, explain its assumptions, and recognise the physical quantities that belong in it. Keep separate cards for facts you repeatedly confuse, such as force versus energy or static versus kinetic friction; do not merge several independent facts into one overloaded prompt.

How MySummaries helps

Build a board from your mechanics notes, then make flashcards from the relations and conditions you need to retrieve. MySummaries schedules card review and can turn missed material into targeted prompts. Start from your own notes at portal.mysummaries.app.