Start with the official learning objectives

The FRM has two parts, both multiple-choice and sat in computer-based sessions. Questions test conceptual understanding, calculation and interpretation, and applying risk frameworks to scenarios. Time pressure makes question triage, clear working and checking units and signs part of the study method—not something to leave until the end.

Before setting a calendar, check the current learning objectives and exam information on the official GARP website. Use those objectives to decide which topics belong in your Part I and Part II plan; do not rely on an old list or assume that a generic risk topic belongs to a particular part. Also check the official site for dates, registration details and any current exam guidance.

The plan below is an eight-week template for a candidate preparing for both parts. It assumes four sessions of about 90 minutes each week, or six hours total, plus a short weekly review. Increase the hours if you have more time; if you are sitting only one part in this period, use the weeks assigned to the other part to deepen work on your current syllabus. Keep separate boards for each part and label each board from the current learning objectives.

Set up a weekly routine

Use the same basic sequence each week:

  1. Retrieve: Begin with due flashcards and a five-minute recall of last session’s key ideas.
  2. Learn: Work through a small section of your own notes or approved study material. Capture definitions, assumptions, model setup and limitations—not just formulas.
  3. Practise: Attempt questions without rushing to the explanation. For calculations, write the given information, the quantity asked for, the setup and the units.
  4. Review: Mark the reason for every error: knowledge gap, wrong setup, arithmetic, units or sign, misread prompt, or poor time use. Turn repeated errors into a short remedial task.

A useful weekly check is whether you can explain what a result means for a risk decision, not only reproduce a calculation. For each method, ask: What assumptions does it rely on? What does the output measure? What could make the result misleading? What action might follow from it?

A due queue makes review specific instead of leaving you to choose what to revise. In MySummaries, the FRM boards might show a few areas to revisit and one that is already clear:

Due today
Part I — Quantitative foundations12 due
Part I — Market risk7 due
Part II — Risk management casesClear

Caption: This due queue shows a sample candidate’s review cards across three FRM boards.

The eight-week plan

Week 1: Map the syllabus and diagnose

Session 1 — 90 minutes: Download or open the current official learning objectives for the part or parts you are taking. Make a checklist of every objective, then group your own materials under those headings. Mark each area as familiar, uncertain or new.

Session 2 — 90 minutes: Try a short, mixed set of practice questions from material aligned to your syllabus. Treat this as a diagnostic, not a prediction of your eventual result. Record why you missed each question, including whether the issue was understanding, setup, calculation, interpretation or time.

Session 3 — 90 minutes: Build your first revision board from your notes, slides or other study materials. Keep sections small enough to review. Include a section for assumptions and limitations, and another for recurring calculation errors.

Session 4 — 90 minutes: Review the diagnostic and choose three weak areas for the next two weeks. Start a flashcard review habit, but make cards test one fact, distinction or step at a time.

Week 2: Rebuild quantitative technique

Session 1 — 90 minutes: Review the quantitative objectives in your syllabus. For each method, note the variables, assumptions and conditions under which the method is being used.

Session 2 — 90 minutes: Work through calculation questions slowly. Show the setup before calculating; label units and state what the answer represents. Check whether the magnitude and direction make sense.

Session 3 — 90 minutes: Practise a timed set. Do not invent a personal exam pace from an assumed question count or duration: use current official information for the exam’s timing, and use your practice set to find where you lose time.

Session 4 — 90 minutes: Rework missed questions from a blank page. Write a short correction beside each one, such as “defined the wrong target quantity” or “forgot to check the scale.”

Week 3: Connect models to market risk decisions

Session 1 — 90 minutes: Study the market-risk objectives assigned to the part you are preparing. Add concise notes on the purpose of each measure or framework and the assumptions that shape its interpretation.

Session 2 — 90 minutes: Practise questions involving risk measures and scenarios. For every answer, say what the result indicates and what it does not indicate. Distinguish a model estimate from a guarantee about future losses.

Session 3 — 90 minutes: Do a timed question set. Triage questions: answer those you can solve cleanly, flag those needing more work, and return to them if time permits. Practise eliminating options using the prompt’s assumptions rather than a remembered formula alone.

Session 4 — 90 minutes: Update your board using your own notes. Move recurring mistakes into a “must check” section and review due cards.

Week 4: Cover credit, operational and liquidity risk where required

Session 1 — 90 minutes: Use the official objectives to select the relevant risk areas for your current part. Build a one-page comparison of the frameworks or measures you are expected to know, including their purpose and limits.

Session 2 — 90 minutes: Practise scenario questions. Identify the exposure, the information given, the question’s target and the relevant framework before choosing an answer.

Session 3 — 90 minutes: Take a mixed, timed practice set from the material you have covered. After marking, look for errors that recur across topics, such as confusing an input with an output or ignoring a distributional assumption.

Session 4 — 90 minutes: Repair the two weakest sections. Explain each concept aloud in plain language, then answer a question that requires applying it.

A board should preserve the links between a formula, its assumptions and the decision it informs. In MySummaries, a market-risk section could be organised around those links rather than a formula dump:

Finance — FRM Part I — Market risk foundationsStudy
Part I · use the current official learning objectives to confirm coveragePart I — Market risk foundations4 sections · 3 columns
Value at Risk: interpretation
  • Meaning — a loss threshold at a stated confidence level and horizon, under the model’s assumptions
  • Not a maximum loss — losses beyond the threshold remain possible
  • Check — identify the confidence level, horizon and loss convention in the question
Stress testing
  • Purpose — examine outcomes under specified adverse scenarios
  • Limitation — results depend on scenario design and do not by themselves give the probability of that scenario
  • Decision link — connect findings to exposures, controls or contingency planning
Expected shortfall

Describe the average loss in the tail beyond the corresponding VaR threshold; state the tail and modelling assumptions used.

Model setup4 due
  • Given — list exposures, horizon, confidence level and any distributional assumption supplied
  • Asked — identify whether the question wants a threshold, tail measure or interpretation
  • Check — verify units, scaling and sign before selecting an option

Caption: This sample board links market-risk concepts to setup checks and interpretation notes.

Week 5: Shift towards applied risk management

Session 1 — 90 minutes: Work through the risk-management and application objectives in the part you are taking. For each framework, write what decision it supports, what information it needs and where it can fail.

Session 2 — 90 minutes: Practise case-style questions across the risk areas named in your syllabus. Start by identifying the main risk and the requested claim or action; then select the framework that fits the prompt.

Session 3 — 90 minutes: Do a timed mixed set. Review distractors as well as your selected answers: note why the strongest alternative does not fit the assumptions or facts in the question.

Session 4 — 90 minutes: Revisit the weakest board sections and make cards from specific errors. A card should test one distinction or one step, not ask you to reproduce an entire topic.

Week 6: Integrate topics and improve accuracy

Session 1 — 90 minutes: Choose a mixed set that combines calculation and interpretation. Write clean working for every calculation, even when you think you can do it mentally.

Session 2 — 90 minutes: Review your error log. Practise the error type that appears most often. For sign, unit or scaling errors, use a consistent final check: units, direction, order of magnitude and whether the result answers the question asked.

Session 3 — 90 minutes: Complete a timed practice block using the computer-based practice environment available to you, if one is provided. Practise moving on from a question that is taking too long and returning when appropriate.

Session 4 — 90 minutes: Explain three difficult areas without notes. Then compare your explanation against your board and add what was missing.

Week 7: Target your remaining weak points

Session 1 — 90 minutes: Rank sections by practice performance and recurrence of errors. Do not spend the whole week polishing topics you already answer reliably.

Session 2 — 90 minutes: Relearn the two weakest sections from your notes. For each, work through a question, explain the answer in risk terms and state an important limitation.

Session 3 — 90 minutes: Take a mixed timed set from across the current syllabus. Use the official exam information to guide your final practice conditions; do not assume a question count or duration that is not stated there.

Session 4 — 90 minutes: Review only the errors and cards that matter most. Make a short final checklist: read the asked quantity, state assumptions, choose the right framework, calculate carefully, interpret, and check limits.

A heat-based picker can help select a short revision session when several topics compete for attention. In MySummaries, the hottest section is driven by recorded missed cards and marks, not by a guess about what is important in the exam:

New lecture
How long have you got?5 min10 min15 min20 min
Model assumptionsMarket-risk interpretationScenario analysis

Model assumptions · Struggling — getting 4 of 9 cards wrong, scored 58% when last examined

Generate lecture ideas

Caption: This picker proposes a short lecture from the section with the most recorded difficulty.

Week 8: Consolidate and protect exam readiness

Session 1 — 90 minutes: Complete a final mixed timed set from the material you have covered. Focus on disciplined pacing and clean selection, not on setting a personal record.

Session 2 — 90 minutes: Review the set carefully. Sort errors into knowledge, setup, calculation, interpretation and timing. Choose a repair action for each category rather than rereading everything.

Session 3 — 90 minutes: Review high-value cards and your “must check” board sections. Rework a small number of representative questions from your weakest areas.

Session 4 — 60–90 minutes: Keep this session light. Check practical details using official guidance, organise materials and sleep normally. Avoid trying to learn an entire unfamiliar topic at the last minute.

After each timed set, rank sections by performance and count how often you have missed them. In MySummaries, that review could look like this:

Where marks go missing
56%Model assumptions and limits5×
68%Risk-measure interpretation8×
84%Scenario-based risk decisions6×

Caption: This weak-area report ranks a sample candidate’s sections by marks earned and practice frequency.

Adjust the plan using evidence

At the end of each week, decide what changes based on your work. If accuracy is low because you do not understand a concept, return to your notes and rebuild the explanation. If you understand the topic but set up questions incorrectly, practise identifying the given information and target quantity. If most errors are calculation or time-related, use short timed sets and review your checks.

If you have fewer than eight weeks, preserve the weekly review and timed practice, but combine adjacent learning weeks rather than skipping error analysis. If you have more time, expand the weeks where your results show recurring weaknesses. For two-part preparation, keep progress separate by part and let the current official learning objectives determine coverage.

How MySummaries helps

MySummaries turns your own PDFs, slides and photographed notes into revision boards, then uses those boards for flashcards, written practice and audio review. For this plan, build separate boards for the FRM parts you are preparing, use due cards to keep recall active, and use recorded practice results to choose what to revisit. Start with MySummaries.