How to use these practice questions
These ten questions cover calculations and concepts that recur across investments and portfolio management study: returns, risk, asset pricing, bond sensitivity, valuation, portfolio construction and performance measurement. They are general subject practice, not a representation of any particular exam’s format. Check your course materials or the relevant examining body for its syllabus and assessment requirements.
Answer each question as it appears, then read the explanation. Pay attention to why the strongest distractor is wrong: many investment questions test whether you can distinguish closely related measures, not just recall a formula. Keep a note of the topic behind any error and return to it after completing the set.
A MySummaries practice question on total return looks like this:
An investor buys one share for $100, receives a $2 dividend, and sells the share for $110 over the holding period. Ignoring taxes and transaction costs, what is the holding-period return?
The return includes both the price change and the dividend: ($110 − $100 + $2) / $100 = 12%. Option B counts only the capital gain; option D incorrectly compounds the dividend separately.
The key distinction is between price return and total return. When a question gives a cash distribution, include it unless the question explicitly asks for capital gain alone. The denominator is the amount invested at the start of the period.
Expected return and portfolio risk
Question 2 tests whether you can apply scenario probabilities consistently, including a negative return in one scenario.
A portfolio has the following possible returns:
- 50% probability of a return of 8%
- 30% probability of a return of 4%
- 20% probability of a return of −10%
What is its expected return? A practice question on probability-weighted return is set out below.
Using the three scenarios above, what is the portfolio's expected return?
Expected return is the sum of each return multiplied by its probability: (0.50 × 8%) + (0.30 × 4%) + (0.20 × −10%) = 4% + 1.2% − 2% = 3.2%. Option D omits the other scenarios; option B does not correctly weight all three outcomes.
Expected return is a weighted average, not the most likely outcome and not an assurance of what the investment will earn. Check that the probabilities sum to 1 and keep percentage units consistent through the calculation.
Question 3 checks whether you can combine asset volatility when the correlation is known. For two assets, portfolio variance is the sum of the weighted variances plus the weighted covariance term.
A portfolio invests 50% in asset A and 50% in asset B. Their standard deviations are 10% and 20%, respectively, and their correlation is zero. What is the portfolio standard deviation?
With zero correlation, variance is (0.5² × 0.10²) + (0.5² × 0.20²) = 0.0125. The square root is about 11.18%. Option C is the weighted average of the standard deviations, which is not the portfolio standard deviation when correlation is below 1.
The covariance term is zero here, but each asset’s variance still contributes. In other questions, use the given correlation to find covariance: correlation multiplied by the two standard deviations.
Required return and bond sensitivity
Question 4 tests the Capital Asset Pricing Model (CAPM), especially the distinction between the market risk premium and the market’s total expected return.
The risk-free rate is 3%, a share's beta is 1.2, and the expected market risk premium is 5%. Under CAPM, what is the share's expected return?
CAPM gives expected return = risk-free rate + beta × market risk premium: 3% + (1.2 × 5%) = 9%. Option D multiplies the risk-free rate by beta as well; option B uses a beta of 1.
Beta scales the market risk premium, not the risk-free rate. Confirm whether a question supplies the market risk premium directly or instead gives the market’s expected return; in the latter case, subtract the risk-free rate first.
Question 5 tests the approximate effect of a yield change on a bond price using modified duration. The question specifies a parallel yield change and asks for the duration estimate, so ignore convexity.
A bond has modified duration of 6. If its yield to maturity rises by 0.50 percentage points, what is the approximate percentage change in its price, ignoring convexity?
The duration approximation is percentage price change ≈ −modified duration × change in yield. Thus −6 × 0.005 = −0.03, or approximately a 3% decrease. Option A gets the direction wrong: bond prices generally move inversely to yields. Option D treats the yield change as 1 percentage point.
Convert percentage points to a decimal before multiplying: 0.50 percentage points is 0.005. Duration estimates are approximations; for larger changes, convexity can make the actual price movement differ.
Valuation and portfolio decisions
Question 6 applies the constant-growth dividend discount model. The dividend given is the next dividend, not the most recent one.
A share is expected to pay a dividend of $2.00 next year. Dividends are expected to grow at 4% indefinitely, and the required return is 10%. Under the constant-growth dividend discount model, what is the value per share?
The model is P₀ = D₁ / (r − g). Here, $2.00 / (0.10 − 0.04) = $33.33. Option B uses the current dividend as if it were D₁ after another growth adjustment; option D incorrectly divides by the growth rate alone.
This model requires the required return to exceed the perpetual growth rate. If a question supplies the most recent dividend, D₀, calculate next year’s dividend as D₁ = D₀(1 + g) before applying the formula.
Question 7 tests the Sharpe ratio, which measures excess return per unit of total volatility.
A portfolio returned 9%, the risk-free rate was 3%, and the portfolio's standard deviation of returns was 12%. What is its Sharpe ratio?
Sharpe ratio = (portfolio return − risk-free rate) / portfolio standard deviation = (9% − 3%) / 12% = 0.50. Option C divides the portfolio’s full return by volatility and omits the risk-free rate; option D uses the full return and a different denominator.
Use the same return period for the portfolio return, risk-free rate and standard deviation. A higher Sharpe ratio indicates more excess return per unit of total risk over the period being measured; it does not by itself establish that a portfolio is suitable for a particular investor.
Question 8 tests the practical logic of rebalancing to fixed target weights, rather than predicting which asset will perform better next.
An investor's target allocation is 60% equities and 40% bonds. After equities outperform, the actual allocation is 70% equities and 30% bonds. To rebalance to target, what should the investor generally do?
Equities are above their 60% target and bonds are below their 40% target. Rebalancing means selling some of the overweight asset and buying the underweight asset, subject to the investor's policy and costs. Option A increases the drift away from target; past outperformance alone does not make the current allocation equal the target.
Rebalancing is a process for restoring a chosen allocation, not a forecast that the asset sold will fall or the asset bought will rise. In practice, taxes, transaction costs, cash flows and the investor’s policy may affect how and when it is carried out.
Diversification and performance measurement
Question 9 checks the role of correlation in diversification. The key is to avoid treating diversification as a guarantee against loss.
Two risky assets have imperfect correlation. What is the most accurate general statement about combining them in a portfolio?
When correlation is below +1, the covariance term can reduce portfolio variance compared with holding assets that move perfectly together, all else equal. It does not guarantee a lower risk than every possible single-asset holding, and it cannot remove all market risk. Option A is only the simple weighted-average result under perfect positive correlation.
The benefit depends on both the assets’ volatility and how their returns move together. Correlation can change over time, so a historical estimate is not a guarantee of future diversification benefits.
Question 10 tests tracking error, a measure of how closely a portfolio’s returns have followed its benchmark.
A manager calculates the monthly active return as portfolio return minus benchmark return for each month. Which statistic is tracking error?
Tracking error is the standard deviation of active returns, commonly annualised when returns are measured monthly. The average active return is the portfolio's average outperformance or underperformance, not its variability. Option A is therefore a measure of active return rather than tracking error.
Keep active return and tracking error separate in your notes: one describes the average difference from the benchmark; the other describes how variable that difference has been. Annualisation conventions depend on the data frequency and the method used, so follow the convention specified in your course or question.
Review the gaps
After answering, sort errors by concept rather than by question number. A wrong CAPM calculation may be a formula issue or a percentage-conversion issue; those need different review. Rework missed calculations without looking at the explanation, then explain in one sentence why the strongest distractor fails. This makes it easier to spot repeated gaps across valuation, risk and performance topics.
A review summary could rank weak areas like this:
If the same distinction is missed more than once, convert it into a short retrieval prompt and test it again later. A focused prompt is more useful than copying a whole explanation into notes.
You missed this twice: tracking error is the standard deviation of which return series? State the series and distinguish it from average active return.
How MySummaries helps
MySummaries lets you build an Investments and Portfolio Management revision board from your own notes, then generate flashcards and written practice questions from that material. Use it to revisit calculation steps and recurring concept gaps against the content you are studying. Open MySummaries.