Start with your course, not a textbook

Physical chemistry links mathematical models to chemical behaviour. A useful study plan therefore needs two kinds of work: learning what an equation means and practising when, why and how to use it. Reading a chapter twice is not a substitute for either.

The topics and depth vary between courses. Before you begin, use your course outline, lecture slides and assessment guidance to make a list of the topics you are expected to know. Check your institution’s current materials if you are unsure whether a topic is included. Common areas include thermodynamics, chemical equilibrium, kinetics, electrochemistry, quantum chemistry and spectroscopy, but do not add material simply because it appears in a general textbook.

Plan for five 75-minute sessions each week, plus a short weekly review. That is about seven hours a week. If you have less time, keep the order of activities and shorten the sessions; avoid dropping problem-solving and review altogether.

Set up a diagnostic

In your first session, choose one representative problem from each major topic on your course outline. Attempt them without notes, marking each topic as secure, uncertain or unfamiliar. The purpose is not to calculate a grade. It is to find out where you need worked examples and where you need retrieval practice.

Make an error log with four columns: topic, what you tried, why it failed, and the correction. Classify each error. Did you choose the wrong model, use an equation outside its assumptions, make an algebra or unit error, or misunderstand the chemistry? That diagnosis tells you what to practise next.

Spaced review helps keep earlier material available while you move on. In MySummaries, a due queue can show which topic boards need a short retrieval session before you start new work. A queue on this subject might look like this:

Due today
Thermodynamics12 due
Chemical kinetics8 due
ElectrochemistryClear

Use the queue as a prompt, not as a timetable by itself. If a board has cards due, spend 10–15 minutes answering them from memory, then check the explanations. Record any repeated mistake in your error log.

Build a usable board from your notes

A revision board should make relationships and assumptions visible. For each topic, keep definitions, equations, conditions of use and one worked example together. Avoid copying whole lecture slides: condense them into statements you can test yourself against.

For example, a thermodynamics board should distinguish the sign convention used in your course. The following board uses the chemistry convention, where heat entering the system and work done on the system are positive. If your course uses a different convention, follow your course notes consistently. In MySummaries, a board on this topic could bring those notes into one place:

Physical Chemistry Thermodynamics: first and second lawsStudy
Core relationshipsThermodynamics: first and second laws5 sections · 3 columns
First law and sign convention
  • Chemistry convention: ΔU = q + w; q > 0 enters the system, w > 0 is work done on it
  • For pressure–volume work, w = −∫Pₑₓₜ dV
Entropy
  • For a reversible path, dS = δqᵣₑᵥ/T
  • For an isolated system, ΔSₜₒₜ ≥ 0; equality holds for a reversible process
Reversible ideal-gas expansion
  • At constant temperature: w = −nRT ln(V₂/V₁)
  • Expansion gives V₂ > V₁ and therefore w < 0
Gibbs energy

At constant temperature and pressure, ΔG = ΔH − TΔS. A negative ΔG indicates a thermodynamically favourable change under those conditions; it does not state how quickly the change occurs.

Enthalpy and heat capacity
  • H = U + pV; at constant pressure, qₚ = ΔH when only pressure–volume work occurs
  • For an ideal gas, Cₚ,m − Cᵥ,m = R

Use this structure as a model for your own course material, not as a replacement for it. Check notation, sign conventions and stated conditions against your notes. Add one example that shows the calculation, including units, and write a short question for each section that you can answer without looking.

A six-week plan

Each 75-minute session has a defined job. Start with 10 minutes of closed-book recall, use 45 minutes for the main activity, then spend 15 minutes on problems and five minutes logging errors. For a full calculation, let the problem work take longer and reduce note-making instead.

Week 1: Map and diagnose

Session 1 — Course map and diagnostic (75 minutes). List the topics in your course outline, gather the relevant notes and attempt one problem from each major area. Mark each topic secure, uncertain or unfamiliar. Do not spend the session trying to repair every gap.

Session 2 — Mathematical tools (75 minutes). Review the mathematical methods your course actually uses, such as rearranging equations, logarithms, differentiation, integration or graph gradients. Practise with physical chemistry quantities and units rather than isolated algebra alone.

Session 3 — Thermodynamics foundations (75 minutes). Define system, surroundings, state function, heat and work. Practise identifying the system and applying your course’s sign convention to expansion and compression.

Session 4 — First-law calculations (75 minutes). Work through energy-change problems, showing the equation, substitution, units and sign at every step. Compare your method with a worked example only after you have made a serious attempt.

Session 5 — Retrieval and repair (75 minutes). Answer questions from the week without notes, then revisit the two errors that cost you the most. End by explaining one calculation aloud, including the assumptions behind it.

Week 2: Thermodynamics and equilibrium

Session 1 — Entropy and spontaneity (75 minutes). Practise distinguishing a system’s entropy change from the total entropy change. State whether each question concerns a reversible path, an isolated system or specified constant conditions.

Session 2 — Gibbs energy (75 minutes). Use ΔG = ΔH − TΔS where appropriate. Check temperature units, sign combinations and what the result tells you. Do not infer a reaction rate from a favourable ΔG.

Session 3 — Equilibrium relationships (75 minutes). Review the definitions and relationships used in your course. For each equation, note the standard state or assumptions it requires; do not mix equilibrium constants and reaction quotients without identifying which one the question provides.

Session 4 — Equilibrium problems (75 minutes). Solve numerical and conceptual questions. Before calculating, write the balanced reaction and identify the quantities known and required.

Session 5 — Mixed review (75 minutes). Mix thermodynamics and equilibrium questions so that you have to choose a method. Update your error log and make cards only for facts or decisions that need repeated recall.

Week 3: Kinetics

Session 1 — Rate laws and orders (75 minutes). Practise reading rate data, identifying the order with respect to each reactant and stating the overall order. Separate an observed rate law from a proposed reaction mechanism.

Session 2 — Integrated rate equations (75 minutes). Match concentration–time data or plots to the equations covered in your course. Check the units of the rate constant for the order involved.

Session 3 — Temperature dependence (75 minutes). Work through the Arrhenius relationship as taught in your course. Pay attention to the units of activation energy, the temperature scale and the meaning of a plot’s gradient.

Session 4 — Mechanisms and rate-determining steps (75 minutes). Test whether a proposed mechanism can support the experimental rate law. Explain the reasoning rather than naming a step without evidence.

Session 5 — Timed mixed practice (75 minutes). Complete a small set of thermodynamics, equilibrium and kinetics questions under a time limit you choose. Review the reasoning and errors afterwards; the purpose is to practise clear working, not to imitate an unspecified exam format.

Week 4: Electrochemistry and another course topic

Session 1 — Electrochemical definitions (75 minutes). Review the cell notation, electrode potentials and sign conventions used in your notes. Identify oxidation and reduction before using a cell-potential equation.

Session 2 — Electrochemical calculations (75 minutes). Work through the relationships and conditions included in your syllabus. Keep track of whether a potential is a standard or non-standard value, and use consistent units and logarithm conventions.

Session 3 — Your next assessed topic (75 minutes). Choose quantum chemistry, spectroscopy, statistical thermodynamics or another listed topic. Make a one-page map of its key ideas, equations and assumptions from your own course material.

Session 4 — Problems on that topic (75 minutes). Attempt questions from your course set, then compare your reasoning with the worked solutions. Add the cause of each error—not just the correct answer—to your log.

Session 5 — Interleaved retrieval (75 minutes). Review all four weeks of material. Mix topics instead of doing one uninterrupted block per subject area; practise recognising which model applies.

Week 5: Target weak areas

Start by using your results, not your preference, to choose the week’s priorities. A picker can direct a short lecture or revision session towards a hot topic: in MySummaries, a topic picker might use repeated card errors and recent practice marks to identify where to work next.

New lecture
How long have you got?5 min10 min15 min20 min
Equilibrium calculationsKinetics: integrated lawsElectrochemical cells

Equilibrium calculations · Struggling — getting 4 of 9 cards wrong, scored 48% when last examined

Generate lecture ideas

Session 1 — Repair the hottest topic (75 minutes). Relearn the specific idea behind your repeated error from your notes. Then do a worked example with the solution visible and a new problem without it.

Session 2 — Repair the next weak topic (75 minutes). Use the same sequence. If your error was mathematical, practise the relevant step; if it was conceptual, explain the model and its limits in plain language.

Session 3 — Topic comparison (75 minutes). Select problems that look similar but require different choices of equation or model. State why each method applies before calculating.

Session 4 — Short written set (75 minutes). Answer a mixed set without notes. Show enough working for another person to follow your assumptions, substitutions and units.

Session 5 — Mark and reattempt (75 minutes). Mark against your course material or provided solutions. Reattempt missed questions from a blank page, then check whether the same error returns.

Week 6: Consolidate and check

Session 1 — Core recall (75 minutes). Rebuild key definitions and equations from memory, adding assumptions and units. Check your work against your notes afterwards.

Session 2 — Mixed calculations (75 minutes). Choose problems across the course outline. Keep a steady pace, but do not skip reasoning to finish faster.

Session 3 — Concept explanations (75 minutes). Explain selected ideas in two minutes each: what the model says, when it applies and what it cannot tell you. Include distinctions such as thermodynamic favourability versus kinetic speed.

Session 4 — Final weak-area set (75 minutes). Return to the errors that have persisted longest. A ranked report can help you decide what deserves the remaining time; in MySummaries, a weak-area view could summarise marks and how often each section has appeared in your practice.

Where marks go missing
48%Equilibrium calculations7×
62%Integrated rate laws5×
84%First-law sign convention8×

Session 5 — Light review and next steps (75 minutes). Review due cards, check your error log and list any remaining questions for your tutor or course materials. Do not replace this review with a last-minute attempt to cover topics outside your course outline.

How MySummaries helps

MySummaries can turn your own physical chemistry notes into revision boards, then use those boards for spaced-repetition cards, targeted audio lectures and practice questions. For this plan, start with your course material, use the board to organise a topic, and let your practice results guide the next weak-area session.