Study guides

Pharmaceutics

5 guides for this subject — how to prepare, what to practise, and how to know it has gone in.

A written answer, marked

A question from a pharmaceutics mock paper, answered and marked. From Pharmaceutics Practice Questions: 10 Worked Examples.

Paper — Pharmaceutics — solutions and calculations04:10
75%Pharmaceutics — solutions and calculations — marked3/4 marks · 04:10 taken

Use a 2% w/v stock solution to prepare 100 mL of a 0.5% w/v solution. State the volume of stock required and how to complete the preparation.

3/4

Using C1V1 = C2V2: V1 = (0.5 × 100)/2 = 25 mL. Measure 25 mL of stock and add diluent to 100 mL.

The calculation and final-volume instruction are correct. Make the concentration basis explicit: both values are % w/v, so the dilution equation is being applied on the same basis.

Missed

State that the final volume is brought up to 100 mL, rather than adding 100 mL of diluent.

Model answerBoth concentrations are expressed as % w/v, so use C1V1 = C2V2. V1 = (0.5% × 100 mL) ÷ 2% = 25 mL. Measure 25 mL of the 2% w/v stock. Add a suitable diluent and bring the final volume to 100 mL. Mix thoroughly.

A spoken answer, marked

An examiner's question, answered out loud and marked criterion by criterion. From Pharmaceutics Viva Questions: A Practical Practice Guide.

Oral — Immediate-release tablet dissolutionMarked

Examiner

A batch of immediate-release tablets is dissolving more slowly than the previous batch. Talk me through the formulation and process causes you would investigate first.

2:383:00Mark answer
78%Immediate-release tablet dissolution — marked78/100 · Developing · 2:38 spoken of 3:00
Structured investigation16/20

You compared the affected batch with the previous batch and proposed checking records, but the sequence of checks was not fully clear.

ImproveStart by confirming the dissolution method and batch difference, then investigate formulation and process variables.

Formulation and process reasoning17/20

You correctly linked disintegration, wetting and compression to dissolution, but gave limited explanation of drug particle properties.

ImproveAdd particle size, solid-state form and solubility as possible contributors where relevant to the drug.

Testing and interpretation14/20

You named disintegration and dissolution tests, but did not explain that a test result needs interpretation alongside batch and method information.

ImproveSay what each test helps distinguish and compare results with the applicable specification and reference data.

A strong answerI would first confirm that the dissolution method, apparatus, medium and sampling were performed as specified, then compare the affected batch with the previous batch and its records. I would investigate drug-related factors such as particle size, solid-state form and solubility, as well as formulation factors that affect wetting or disintegration. I would review granulation, lubricant use and blending, compression force and tablet porosity because these can alter disintegration and liquid penetration. I would compare disintegration and dissolution results with other relevant quality data rather than treating either test as a complete explanation. Once I had evidence for a cause, I would assess its impact and follow the appropriate quality investigation and change-control process.

Start studying pharmaceutics

Yours are written from your own notes, and the free plan needs no payment details.

Guides

Studying pharmaceutics? Build your pharmaceutics board from your own notes — the cards, papers and lectures are written from it. Free plan: 20 cards, a paper, a lecture and a viva to try.

Start on MySummaries

Other subjects