How to study this deck

Electromagnetism is easier to revise when you can retrieve a relationship, state its conditions and use it with the correct direction and units. Reading an equation and recognising it is not the same as recalling it. For each card below, try to give the answer before turning the card. Then grade the attempt: choose Again if you could not retrieve it, Hard if you needed a long pause or missed an important detail, Good if you answered correctly with a little effort, and Easy if the answer came promptly and precisely.

In MySummaries, the deck is drawn from a revision board, so related facts can be reviewed together rather than treated as isolated equations. Start with the face-up card: read its question, say the answer from memory, reveal the answer, and choose a grade. Continue through the remaining cards in the same way. The deck covers electrostatics, circuits, magnetic forces and induction; the facts are stated for the conditions named on each card.

A compact electromagnetism deck ends up looking like this:

Cards — Electromagnetism fundamentals19 due

State Coulomb's law for two point charges in vacuum.

F = (1/(4πε₀))|q₁q₂|/r²; the force acts along the line joining the charges and is attractive for unlike charges, repulsive for like charges.

All 19 cards
State Coulomb's law for two point charges in vacuum.F = (1/(4πε₀))|q₁q₂|/r²; the force acts along the line joining the charges and is attractive for unlike charges, repulsive for like charges.
Define electric field strength at a point.E = F/q, the force per unit positive test charge; its SI unit is N C⁻¹, equivalent to V m⁻¹.
What is the electric field magnitude a distance r from a point charge Q in vacuum?E = (1/(4πε₀))|Q|/r²; the field points away from positive Q and towards negative Q.
What is the electric potential V a distance r from a point charge Q in vacuum, taking zero at infinity?V = (1/(4πε₀))Q/r; potential is a scalar and retains the sign of Q.
Give the capacitance of parallel plates of area A separated by d in vacuum, neglecting fringing.C = ε₀A/d, in farads.
What energy is stored in a capacitor of capacitance C at potential difference V?U = ½CV², equivalently ½QV or Q²/(2C).
State Ohm's law for an ohmic conductor at constant temperature.V = IR: potential difference is proportional to current when temperature and other physical conditions are constant.
How is resistance related to resistivity for a uniform wire of length L and cross-sectional area A?R = ρL/A, where ρ is the material's resistivity.
What does Kirchhoff's current law say at a circuit junction?The total current entering a junction equals the total current leaving it; it expresses conservation of charge.
Write the magnetic part of the Lorentz force on a charge q moving with velocity v in magnetic field B.F = q(v × B); its magnitude is |q|vB sin θ, where θ is the angle between v and B.
What force acts on a straight wire segment of length vector L carrying current I in magnetic field B?F = I(L × B); the magnitude is ILB sin θ for a uniform field.
Give the magnetic field magnitude a distance r from a long straight wire carrying current I in vacuum.B = μ₀I/(2πr); the field lines are concentric circles around the wire.
State Faraday's law for the induced emf in a coil of N turns.ε = −N dΦB/dt, where ΦB is magnetic flux through one turn; the minus sign expresses Lenz's law.
What is the magnetic flux through a flat area A in a uniform field B?ΦB = BA cos θ, where θ is the angle between B and the area normal.
What does Lenz's law tell you about the direction of induced current?The induced current flows in a direction whose magnetic effect opposes the change in magnetic flux that produced it.
What is the induced emf across an inductor of inductance L when its current changes?ε = −L dI/dt; the induced emf opposes the change in current.
For an ideal transformer, how are voltage ratio and turns ratio related?Vs/Vp = Ns/Np, where p and s denote primary and secondary; the ideal power relation is VpIp = VsIs.
What is the RMS value of a sinusoidal voltage with peak value V₀?Vrms = V₀/√2; this applies to a sinusoid, not to every waveform.
What is the speed of an electromagnetic wave in vacuum in terms of ε₀ and μ₀?c = 1/√(μ₀ε₀), approximately 3.00 × 10⁸ m s⁻¹.

That is a MySummaries deck, filled with electromagnetism material. Yours is written from your own notes. Start free

A reliable way to work through the cards

Do not grade yourself on whether an equation looks familiar. Give a complete spoken or written answer before revealing the back. For a formula, include what each symbol means, the relevant condition and the unit when it helps distinguish similar quantities. For a direction question, state the direction rule as well as the magnitude relationship. This makes a card useful for solving problems, not just reproducing notation.

A card on Coulomb's law, for example, is not fully answered by saying “inverse square”. Retrieve the dependence on both charges, the separation, the constant for vacuum and the attraction or repulsion rule. For electric potential, remember that the expression has the sign of the source charge, while the magnitude of the electric field does not. The field is a vector; potential is a scalar. Those distinctions prevent common sign errors.

When a card is Again or Hard, pause briefly and locate the cause. Was the equation forgotten, was a condition missing, or was a direction reversed? Then review the relevant note on your board and retry the card after a short gap. If the same mistake returns, make the card more specific or add a separate card for the distinction. Avoid putting several unrelated laws onto one card: a card should test one retrievable fact.

Check the foundations behind the deck

The deck is most useful when you can connect each fact to the principle it expresses. Coulomb's law and the point-charge field describe electrostatic interactions; capacitance relates stored charge to potential difference; Kirchhoff's current law is conservation of charge. The magnetic-force cards depend on vector products, so the angle matters: a charge moving parallel to a magnetic field experiences no magnetic force, while a perpendicular motion gives the maximum magnitude.

Induction needs particular care. Magnetic flux depends on field strength, area and orientation, so changing any of these can change the flux. Faraday's law relates the induced emf to the rate of change of flux, including the number of turns. Lenz's law gives the sign's physical meaning: the induced effect opposes the change, not necessarily the original field itself. When practising a problem, draw the original field, identify whether flux is increasing or decreasing, and then determine the opposing effect.

The Must not miss core behind the deck is a short check of the equations and conditions most likely to be confused:

Key pointsElectromagnetism fundamentals
Coulomb: F = (1/(4πε₀))|q₁q₂|/r² in vacuum; along the line joining the charges, attractive for unlike charges.
Point charge: E = (1/(4πε₀))|Q|/r², while V = (1/(4πε₀))Q/r with zero potential at infinity.
Capacitor and wire: C = ε₀A/d for vacuum parallel plates neglecting fringing; R = ρL/A for a uniform wire.
Magnetic force and induction: F = q(v × B); ε = −N dΦB/dt, with the induced effect opposing the flux change.
Sinusoidal AC and vacuum waves: Vrms = V₀/√2; c = 1/√(μ₀ε₀) ≈ 3.00 × 10⁸ m s⁻¹.

Use this core after a first pass through the deck, not instead of retrieving the individual cards. It checks whether the main relationships and their conditions are available together. If you miss a core item, identify the linked card or note and practise that exact distinction again.

Turn missed answers into a targeted review

A missed card is useful evidence. If you repeatedly confuse flux with field strength, review the area normal and the cosine in ΦB = BA cos θ. If you remember Faraday's magnitude but omit the negative sign, practise explaining what Lenz's law opposes. If the transformer ratios become muddled, label primary and secondary quantities before substituting values. Correct the underlying reasoning, then test yourself again later rather than immediately repeating the same answer until it feels familiar.

A remediation tray can turn a repeated loss into one specific prompt to revisit:

Remediation tray

You lost this mark twice: a coil has N turns and its magnetic flux per turn changes from 0.020 Wb to 0.005 Wb in 0.10 s. What is the magnitude of the average induced emf, and what does the minus sign in Faraday's law describe?

Add cardDismiss

For this prompt, calculate the rate of change per turn first, then multiply by N: the magnitude is N × 0.015/0.10 = 0.15N volts. The minus sign specifies the direction of the induced emf through Lenz's law; it does not make the reported magnitude negative. That distinction is the point to retrieve next time.

How MySummaries helps

Build an electromagnetism revision board from your own notes, then generate and review flashcards from it. Open MySummaries to organise the material you are studying and practise the facts you need to retrieve.