Build a plan around problems, not just topics
Electromagnetism combines physical ideas with mathematical tools. Revision can feel familiar while still leaving gaps: you may recognise a law but not know which symmetry makes it useful, or remember Faraday’s law but miss the minus sign when finding an induced current. A workable plan therefore needs both concept recall and repeated problem-solving.
This four-week plan uses five 75-minute sessions per week: 6 hours and 15 minutes weekly, or 25 hours over four weeks. Start with the first session this week. If you have more or less time, keep the same sequence and change the number of sessions rather than removing the practice and review stages.
First, check your course outline, lecture notes and past or sample questions. Electromagnetism courses differ in how far they go into topics such as electromagnetic waves, material properties and Maxwell’s equations. Use your own course material to decide what is examinable; do not spend time on an advanced topic just because it appears in a general textbook.
Use one 75-minute pattern throughout:
- 10 minutes: retrieve key ideas from memory, without looking at notes.
- 35 minutes: study one defined section of your own material and add concise explanations or worked steps to your revision board.
- 25 minutes: solve problems, showing units, assumptions and intermediate steps.
- 5 minutes: record errors and set the next review.
Take a short break if needed, but keep the working time consistent. A board in MySummaries could organise your notes like this:
- Point charge: E = (1/4πε₀)q/r², directed radially; potential V = (1/4πε₀)q/r.
- For a uniform field, ΔV = −E·Δr; potential decreases in the field direction.
- Magnetic flux: Φ_B = ∫B·dA; for uniform B, Φ_B = BA cos θ.
- Faraday–Lenz law: ε = −dΦ_B/dt; the induced current opposes the change in flux.
∮E·dA = Q_enclosed/ε₀. Use it to find E when the charge distribution has suitable symmetry; choose a Gaussian surface that matches that symmetry.
- For a resistor, V = IR; power P = IV = I²R = V²/R.
- For a series RC discharge, q(t) = Q₀e^(−t/RC); the time constant is τ = RC.
- Charge: F = qv × B; magnitude |q|vB sin θ.
- Straight wire: F = IL × B; reverse the force direction if the current direction reverses.
Week 1: establish the field foundations
Session 1 — Vectors, charge and Coulomb’s law. Review charge, superposition and the vector form of Coulomb’s law. Practise adding two or three field contributions at a point. Draw each vector before calculating; a correct magnitude with the wrong direction is still a wrong physical answer.
Session 2 — Electric field. Work from the definition E = F/q to fields due to point charges and simple charge distributions covered in your notes. Make a sketch of field lines, then connect the sketch to the sign and direction of the field. Include at least one problem where components must be resolved.
Session 3 — Electric potential and energy. Distinguish potential from potential energy: V is energy per unit charge, while U = qV. Practise potential from point charges and relate potential differences to work and to the field in a uniform-field problem.
Session 4 — Gauss’s law. State the integral law, then decide when symmetry makes it useful. Work through the geometries actually taught in your course, such as spherical, cylindrical or planar symmetry. For each, identify the Gaussian surface and explain why E is constant or has zero flux on each part.
Session 5 — Mixed retrieval and error check. Spend 20 minutes recalling the week’s definitions and equations from a blank page. Use the remaining time for two mixed problems, then correct them from your notes. Label each error: concept, vector direction, algebra, units or a missed condition. That label tells you what to practise next.
Week 2: circuits and magnetic fields
Session 1 — Current, resistance and circuit rules. Review current, potential difference, resistance and power. Solve circuit problems using Kirchhoff’s current and voltage laws if they are part of your course. Check that your signs match your chosen loop direction and that the final units are sensible.
Session 2 — Magnetic force on charges. Practise F = qv × B and identify the angle between velocity and magnetic field. Use the right-hand rule for a positive charge, then reverse the direction for a negative charge. Include the limiting cases: parallel motion gives zero magnetic force; perpendicular motion gives maximum magnitude.
Session 3 — Motion in a magnetic field. Where included in your syllabus, connect the magnetic force to circular motion. For a particle moving perpendicular to a uniform field, equating |q|vB to mv²/r gives r = mv/(|q|B). State the assumptions before using the result; a velocity component parallel to B is not bent by the magnetic force.
Session 4 — Force on a current-carrying wire. Work through F = IL × B and applications such as the force between parallel currents if covered. Draw current and field directions, and determine the force direction before inserting values.
Session 5 — Ampère’s law and topic check. Revise the form of Ampère’s law used in your course and practise its stated applications. Then do a short mixed set combining electric fields, circuits and magnetic forces. If you cannot explain why a law applies, return to the physical conditions rather than memorising another formula.
Week 3: changing fields and induction
Session 1 — Magnetic flux. Calculate flux from Φ_B = ∫B·dA and use Φ_B = BA cos θ for a uniform field through a flat area. Draw the area normal: the angle in the cosine is between that normal and B, not necessarily between B and the plane.
Session 2 — Faraday’s law. Practise finding induced emf from the rate of change of flux. Vary one quantity at a time: field strength, area or orientation. Keep track of whether the question asks for magnitude or direction.
Session 3 — Lenz’s law. For each problem, state what is changing, determine the direction of the change in flux, and then choose an induced field that opposes that change. Only after that should you infer the current direction. This written chain prevents the common error of saying the induced field opposes the original field in every case.
Session 4 — Inductance and transients. Study self-inductance, energy storage and RL or RC behaviour only to the depth required by your notes. Practise reading time constants from the relevant equations and sketching the initial and long-time behaviour. Check carefully whether the question concerns current, charge or voltage.
Session 5 — Maxwell’s equations and waves. Retrieve the forms and physical meanings of the Maxwell equations your course requires. If electromagnetic waves are included, connect the changing electric and magnetic fields to wave propagation and use the relations given in your notes. Do not assume a particular level of derivation is required; check your course outline and sample questions.
Week 4: integration and exam-ready practice
Session 1 — Rebuild the equation map. From memory, group equations by the situation they describe: electrostatics, circuits, magnetic force and induction. Add a short condition beside each one. For example, Gauss’s law is always valid, but using it to calculate E directly depends on sufficient symmetry.
Session 2 — Mixed problems, set one. Work through a timed set drawn from your course material. Choose questions that require selecting a method, not only substituting numbers. Mark your own work against the steps in the solution and note where you made the first incorrect decision.
Session 3 — Repair the weakest topic. Use your error log and review data to choose one section. Relearn the relevant explanation from your notes, then solve three problems that progress from straightforward to unfamiliar. Finish by explaining the method aloud without looking at the page.
Session 4 — Mixed problems, set two. Use a different mix of topics. Practise writing a clear setup: diagram, known quantities, chosen law, assumptions and units. If your course uses a particular paper format or timing, follow the official course guidance or your instructor’s instructions rather than guessing.
Session 5 — Final retrieval and next steps. Recreate the equation map, answer a handful of short conceptual prompts, and revisit errors from the month. Keep a short list of facts or methods you still cannot retrieve. Schedule those for the next review cycle instead of rereading every topic from the beginning.
Keep the plan responsive
The four-week sequence is a starting structure, not a reason to stick with a topic that is already secure while a persistent error remains. Review flashcards or questions due for review at the start of a session, then use your remaining time for that week’s task. In MySummaries, a due queue for electromagnetism boards could look like this:
Once a week, inspect the board rather than judging progress by hours alone. A useful section has the central law, the conditions for applying it, a worked example and the mistakes you tend to make. Keep equations beside their meanings and units; a board that contains symbols without decisions will not help much with unfamiliar problems.
Choose a short audio review when you need to revisit a connected explanation, and use a focused lecture rather than replaying a whole topic. The sections and their review status can guide that choice:
Gauss’s law and symmetry · Struggling — 5 of 11 cards missed and 46% earned on the latest practice questions
Percentages in your own study history are useful for comparison, not as a judgement of readiness by themselves. Check whether the errors are recurring and whether you can now solve a fresh problem without following a worked example. A weekly weak-area view can make the next session more precise:
Treat “times” as practice history for these sections, not as a claim about how often a topic appears in an examination. If the weakest section is also important in your course, give it a repair session; if the cause is careless algebra or vector direction, target that skill across several topics.
How MySummaries helps
MySummaries lets you build boards from your own electromagnetism notes and slides, then use their sections to organise spaced-repetition cards, written practice and audio revision. The review queue and weak-area view can help you choose what to do in each session, while your course material remains the reference for what you need to cover.