How to use these electromagnetism practice questions
These ten single-best-answer questions cover electrostatics, magnetic fields, induction and circuits. They are useful for checking whether you can select and apply a relationship, not just recall its name. The values and wording are suitable for general physics practice; your course or examination may emphasise different topics, so check its specification for the exact syllabus and question format.
Answer each question as it appears, then read the explanation. Pay attention to the strongest distractor: it often uses the right equation with a wrong unit, direction or assumption. If you miss a question, identify the step that failed—choosing the model, substituting values, calculating, or interpreting the result—and revisit that skill.
1. Capacitance of parallel plates
This tests whether you can use the parallel-plate model and convert the result into a practical unit.
Two parallel plates have area 2.0 × 10⁻² m² and separation 1.0 × 10⁻³ m. They are separated by air, treated as a vacuum. What is their capacitance? Use ε₀ = 8.85 × 10⁻¹² F m⁻¹.
For parallel plates, C = ε₀A/d. Substitution gives 8.85 × 10⁻¹² × 2.0 × 10⁻² / 1.0 × 10⁻³ = 1.77 × 10⁻¹⁰ F. The closest distractor, 4.43 × 10⁻¹³ F, results from mishandling the powers of ten.
The important check is dimensional as well as numerical: permittivity multiplied by area and divided by distance gives farads. Do not substitute the plate separation in millimetres without converting it to metres.
2. Magnetic force on a moving charge
This tests the magnitude of the magnetic Lorentz force when velocity and field are perpendicular.
A proton travels at 2.0 × 10⁶ m s⁻¹ perpendicular to a uniform magnetic field of 0.30 T. What is the magnitude of the magnetic force? Take the proton charge as 1.60 × 10⁻¹⁹ C.
F = qvB sin θ, and sin 90° = 1. Thus F = (1.60 × 10⁻¹⁹)(2.0 × 10⁶)(0.30) = 9.6 × 10⁻¹⁴ N. The 2.7 × 10⁻¹² N distractor does not follow from the given charge, speed and field; check the multiplication and powers of ten.
If the motion were not perpendicular to the field, the sine factor would matter. For a direction question, use a stated convention such as the right-hand rule for a positive charge, then reverse the direction for a negative charge.
3. Field around a straight wire
This tests the magnetic field strength at a specified distance from a long, straight current-carrying wire.
A long straight wire carries a current of 8.0 A. What is the magnetic field magnitude 4.0 cm from the wire? Use μ₀ = 4π × 10⁻⁷ T m A⁻¹.
For a long straight wire, B = μ₀I/(2πr). With r = 0.040 m, B = (4π × 10⁻⁷ × 8.0)/(2π × 0.040) = 4.0 × 10⁻⁵ T. The 1.6 × 10⁻⁴ T distractor is four times too large, consistent with using 1 cm rather than 4 cm for the distance.
Convert centimetres to metres before substitution. The field is inversely proportional to distance, so doubling the distance halves the field.
4. Faraday’s law
This tests induced electromotive force when the magnetic field through a coil changes at a steady rate.
A 200-turn coil has area 3.0 × 10⁻⁴ m² per turn. A perpendicular magnetic field falls uniformly from 0.50 T to 0.10 T in 0.020 s. What is the magnitude of the induced emf?
Faraday’s law gives |ε| = N|ΔΦ|/Δt. With the field perpendicular to the coil, Φ = BA, so |ε| = 200 × 3.0 × 10⁻⁴ × 0.40 / 0.020 = 1.2 V. The 0.060 V distractor omits the 200 turns; the changing flux linkage is N times the flux per turn.
Use the magnitude of the change for an emf magnitude question. Lenz’s law supplies the direction: the induced current creates a field that opposes the change in flux, not necessarily the original field itself.
5. Energy stored in an inductor
This tests the energy relationship for a current in an ideal inductor.
An ideal 0.40 H inductor carries a steady current of 3.0 A. How much energy is stored in its magnetic field?
The stored energy is U = ½LI² = ½ × 0.40 × 3.0² = 1.8 J. The 3.6 J distractor omits the factor of one half. Squaring the current is essential.
A useful check is that doubling the current makes the stored energy four times larger, because current is squared.
6. Charging a capacitor in an RC circuit
This tests the meaning of the time constant in a charging circuit.
A capacitor charges from an ideal voltage source through a resistor. At one time constant, τ = RC, what fraction of its final charge has it gained?
For charging, q(t) = Qfinal(1 − e⁻ᵗ/ᴿᶜ). At t = RC, the fraction is 1 − e⁻¹ ≈ 0.632, or 63%. About 37% is the fraction of the final charge still missing at that time, and is a common mix-up with the discharging curve.
The distractor of about 37% is especially tempting because it is also correct for the fraction remaining during discharge after one time constant. State whether the capacitor is charging or discharging before using the exponential form.
7. Velocity selector
This tests when electric and magnetic forces balance for a charged particle moving through crossed fields.
A particle passes undeflected through perpendicular electric and magnetic fields. The electric field strength is 3.0 × 10⁴ V m⁻¹ and the magnetic field strength is 0.20 T. The fields are arranged so their forces oppose. What is the particle’s speed?
For no deflection, qE = qvB, so v = E/B = (3.0 × 10⁴)/0.20 = 1.5 × 10⁵ m s⁻¹. The 6.0 × 10³ distractor comes from multiplying E by B rather than dividing; the units also reveal that the product is not a speed.
The charge cancels, so the selected speed does not depend on whether the particle is positively or negatively charged, provided the forces oppose as stated.
8. Field inside a solenoid
This tests the approximate field inside a long solenoid in air or vacuum.
A long solenoid has 1,200 turns per metre and carries a current of 2.0 A. What is the approximate field inside it? Use μ₀ = 4π × 10⁻⁷ T m A⁻¹.
For a long solenoid, B = μ₀nI. Thus B = 4π × 10⁻⁷ × 1,200 × 2.0 ≈ 3.0 × 10⁻³ T. The 1.5 × 10⁻⁴ T distractor is far too small and can result from mishandling the turns-per-metre value or powers of ten.
Here n is turns per metre, not the total number of turns. Include the unit when extracting a value from a problem statement.
9. Ideal transformer
This tests the turns ratio for a transformer operating with alternating current.
An ideal transformer has 1,200 turns on its primary coil and 100 turns on its secondary. The primary voltage is 240 V. What is the secondary voltage?
For an ideal transformer, Vs/Vp = Ns/Np. Therefore Vs = 240 × 100/1,200 = 20 V. The 2,880 V distractor reverses the turns ratio, incorrectly treating this step-down transformer as a step-up transformer.
For an ideal transformer, the voltage ratio follows the turns ratio; the current ratio is inverse. Do not assume a real transformer has no losses unless the question says it is ideal.
10. Electric potential from a point charge
This tests electric potential due to a point charge, with the zero of potential taken at infinity.
What is the electric potential 0.30 m from an isolated +2.0 nC point charge in vacuum? Use k = 8.99 × 10⁹ N m² C⁻² and take zero potential at infinity.
V = kQ/r = (8.99 × 10⁹)(2.0 × 10⁻⁹)/0.30 ≈ +60 V. The +6.0 V distractor is a factor of ten too small, usually from a power-of-ten error. The potential is positive because the source charge is positive.
Potential is a scalar, so no direction or vector components are needed. For several point charges, add their potentials algebraically, including their signs.
From a multiple-choice result to a full answer
A selected option can show that you recognise a relationship, but a written response also needs a clear method and an appropriate unit. In a short-answer question, write the governing equation, identify the quantity being calculated, substitute values in SI units, and state the result with its unit. For induction, explain the direction separately when asked; the magnitude calculation alone does not establish Lenz’s-law reasoning.
This marked example focuses on that distinction. The candidate calculates the emf correctly but gives only a brief direction statement.
A 200-turn coil of area 3.0 × 10⁻⁴ m² is in a perpendicular magnetic field that decreases from 0.50 T to 0.10 T in 0.020 s. Calculate the induced emf and state how Lenz’s law determines the induced field’s direction.
3/4ε = N A ΔB/Δt = 200 × 3.0 × 10⁻⁴ × 0.40/0.020 = 1.2 V. The induced field opposes the change.
The emf magnitude and substitution are correct. The direction statement recognises opposition to change but does not identify what flux change is being opposed.
Missed
−State that the original magnetic flux is decreasing, so the induced field acts in the same direction as the original field to oppose that decrease.
Model answerThe magnitude of the induced emf is |ε| = N|ΔΦ|/Δt. Since the field is perpendicular to the coil, |ΔΦ| = A|ΔB|, giving |ε| = 200 × 3.0 × 10⁻⁴ × 0.40/0.020 = 1.2 V. The original flux is decreasing. By Lenz’s law, the induced field acts in the same direction as the original field, opposing the decrease in flux.
That is a MySummaries paper, filled with electromagnetism material. Yours is written from your own notes. Start free
The lost mark is about linking the law to the specific change, not about adding more algebra. Practise naming both the change in flux and the direction of the induced field.
Find the weak link
A useful review separates errors by topic. A low score in induction, for example, could reflect a failure to calculate flux, use the number of turns, or explain the direction. The topic label tells you where to investigate; your working tells you what to practise next.
After correcting an answer, solve a fresh problem that uses the same principle but different values. That checks whether you learned the method rather than memorised one calculation.
A repeated lost mark is a good prompt for a small, targeted revision task. For example, if the same Lenz’s-law explanation keeps being incomplete, make sure you can state what is changing and which direction the induced field must take.
You lost this mark twice: the magnetic flux through a coil is decreasing. In which direction must the induced field act, and what change does it oppose?
How MySummaries helps
MySummaries builds a revision board from your own physics notes and can generate question practice against that material. Use marked answers to spot recurring gaps, then turn missed facts into flashcards for spaced review. This is most useful when the board reflects your course notes and you check its question coverage against your syllabus.