Electromagnetism can feel like a collection of unrelated equations: electric fields, circuits, magnetic forces and induction. It becomes more manageable when you organise it around a few physical ideas, learn what each equation assumes, and practise choosing a model before substituting numbers.
There is no single international exam structure or syllabus for electromagnetism. Start with your course outline and past papers, and check your institution’s official materials for the topics and conventions you are expected to know. The method below works across many introductory courses; adjust the detail to match your course.
1. Build a board from your course materials
Gather the material you are actually assessed on: lecture slides, textbook sections, problem sheets, laboratory notes and photographed handwritten notes. Sort it into a few connected sections rather than making one long formula sheet. A useful starting structure is electrostatics, circuits, magnetism, induction and electromagnetic waves. If your course does not cover waves, replace that section with a topic from its syllabus.
For each section, capture four things: the physical idea, the equation, its conditions of use, and one representative problem. Include definitions and conventions from your own notes—for example, whether a particular course uses a stated direction for current or a particular sign convention for potential. Keep derivations that your course expects, but do not mistake memorising a derivation for being able to apply the result.
A board in MySummaries can arrange those ideas beside the details drawn from your own course materials. A board on this topic ends up looking like this:
- Coulomb’s law: F = (1/4πε₀) q₁q₂/r² for point charges in vacuum
- Electric field: E = F/q; point charge field has magnitude k|Q|/r²
- Potential difference: ΔV = −∫ E·dl
- Force on a charge: F = qv × B; magnitude |q|vB sin θ
- Force on a straight wire: F = IL × B
- For a positive charge, use the right-hand rule; reverse the direction for a negative charge
- ∮E·dA = Q_enclosed/ε₀
- Use symmetry to take E outside the integral for spherical, cylindrical or planar symmetry
- For a point charge, E = kQ/r² radially outward for Q > 0
- Magnetic flux: ΦB = ∫B·dA
- Faraday’s law: emf = −dΦB/dt for a single loop
- The minus sign expresses Lenz’s law: induced current opposes the change in flux
| Quantity | Relation |
|---|---|
| Ohm’s law | V = IR |
| Electrical power | P = IV = I²R = V²/R |
| Capacitor charge | Q = CV |
Use the board to make links visible. Potential difference is related to the electric field by a line integral; current in a resistor produces power; a changing magnetic flux produces an induced emf. These connections help you decide which model applies to a problem, rather than reaching for whichever equation looks familiar.
2. Learn the conditions, not just the equations
Make a short “must not miss” checklist from the board. For each item, include a condition or a common trap. The goal is to be able to say not only what an equation is, but what physical situation it describes and what its symbols mean.
A good checklist is deliberately compact. Put longer derivations and examples in their relevant board sections. Before an assessment, use the checklist to locate gaps, then return to your course notes to repair them.
A Must not miss core in MySummaries might look like this:
Check each item against your course’s notation. For example, some courses reserve E for field strength and use V for electric potential, while others may present a different sign convention for a stated quantity. Keep your notes’ definitions alongside any equation that depends on a direction or sign.
3. Practise retrieval with short, exact prompts
Flashcards work well for definitions, relationships, units and quick predictions. They work less well for full derivations or multi-step circuit problems, which need written working. Make one card test one thing. If the answer requires a paragraph, split it into smaller questions or turn it into a worked problem to practise separately.
In MySummaries, cards can be generated from the board and reviewed with spaced repetition. When you answer, grade honestly: a correct guess is not the same as being able to explain the result. A card drill from this board looks like this:
What is the SI unit of electric field strength?
N C⁻¹, equivalent to V m⁻¹.
All 6 cards
That is a MySummaries deck, filled with electromagnetism material. Yours is written from your own notes. Start free
After reviewing a card, ask yourself what mistake it is designed to prevent. For the Lenz’s law card, for instance, the common error is to say that the induced current always opposes the magnetic field. It opposes the change in flux, which may mean reinforcing the original field if that field is decreasing.
4. Solve problems in a repeatable order
For every written problem, use the same sequence:
- Sketch the setup. Mark charges, current directions, field directions, dimensions and the point where a quantity is required.
- Name the system and model. Decide whether the problem concerns point charges, a symmetric charge distribution, a circuit, a moving charge or changing flux.
- Write the relevant law before substituting. State the equation and any assumptions, such as a uniform field or an ideal component.
- Choose axes and signs. For vectors, draw the direction of each cross product. For circuits, define current directions and keep them consistent; a negative answer then indicates the actual direction is opposite to your assumption.
- Calculate, check units and interpret. Check whether the magnitude and direction make physical sense. Test limiting cases where possible: a magnetic force should vanish when velocity is parallel to the field.
Do not skip the diagram because a question seems familiar. A correct equation with the wrong angle, flux direction or circuit sign can still produce a wrong result. When you review a solution, identify the first incorrect decision—not just the line where the arithmetic diverged.
5. Turn mistakes into the next study session
Keep an error log with three columns: what you did, why it failed, and what rule you will use next time. Useful labels include “chose the wrong law”, “missed a condition”, “direction error”, “units”, and “algebra”. This shows whether your problem is conceptual or procedural.
A practical session might take 50 minutes: spend 10 minutes retrieving definitions and equations, 25 minutes solving two or three problems without notes, and 15 minutes checking solutions and logging errors. Use the remaining time, if available, to revisit the specific board section that caused trouble. Longer sessions can use the same cycle; take a break between cycles rather than extending a problem set without review.
Once a week, choose a mixed set of problems. Mixing topics forces you to identify the physical model before you calculate. After marking, update the board and make cards only for compact facts you repeatedly forget. A problem-solving mistake may need another worked example, not another flashcard.
6. Use audio for a different kind of review
An audio explanation is useful when you want to rehearse a derivation or listen for gaps in your verbal explanation. It should follow the sequence in your notes, define symbols as it goes, and explain why each step is valid. Listening does not replace solving: pause after a question is posed and predict the next step, then compare your reasoning with the explanation.
MySummaries can turn the board’s sections into an examiner-voice lecture, giving you another way to review the same material. A lecture made from the board might sound like this:
Transcript · tap any word to jump there
Start by drawing the surface whose flux you are tracking. Magnetic flux is the integral of the magnetic field through that surface, so both the field strength and its angle to the area vector matter. For a uniform field and a flat surface, ΦB = BA cos θ.
Faraday’s law says that the induced emf is −N times the rate of change of flux. If a ten-turn coil has its flux per turn reduced from 0.020 weber to 0.005 weber in 0.10 seconds, the magnitude of the average induced emf is N times 0.015 divided by 0.10, or 1.5 volts. The minus sign tells us about direction; it is not an instruction to report a negative magnitude in every context.
Now use Lenz’s law to find that direction. The induced current creates a magnetic effect opposing the change in flux. First state whether the original flux is increasing or decreasing, then identify what field the coil must produce to oppose that change. Only after that should you use a right-hand rule to infer the current direction.
Use the lecture to check whether you can explain the same chain of reasoning without relying on the narration. If you cannot, return to the relevant notes and work through an example with a diagram.
7. A simple weekly routine
Aim for regular, focused sessions rather than one long review immediately before an assessment. For example, use three sessions each week: one to learn and organise a new section; one to solve problems from it; and one to review due cards and attempt a mixed set. Adjust the frequency to your timetable and the pace of your course.
At the end of each week, check your course outline, identify the next topic, and choose problems that cover both the new material and earlier sections. Keep a list of unresolved questions for your instructor or study group. If a topic remains unclear after checking your notes and worked examples, seek help with the exact step that breaks down.
How MySummaries helps
MySummaries builds a revision board from your own PDFs, slides and photographed notes, then uses that board to create flashcards with spaced repetition and examiner-voice audio lectures. That lets you keep equations and explanations tied to the material your course actually uses. You can explore it at portal.mysummaries.app.